I always put them () but )( is also acceptable.

that is cool matt

WOW!! I am impressed!! Just never know what you are going to learn when you turn on this forum. Thanks!!

now that doesnt look halfway bad, i thought it woulda been worse than that and or more parts,, ima practice on some old reels,, thanks Matt

I have a question, regarding the spacers in the spool tension knob, or actally the lack there of. On the website here:
http://www.abugarcia.com/view_schematic.php?s_id=1719&id=239.240.1716#

note part #s 57 and 58.

I never saw them in my Revo STX, and figured I had lost them, and was fixing to order replacements, but now I notice in your breakdown of the reel, they are not present in your STX either.

So, do I need them, or not? I STRONGLY believe my reel DID NOT come with these spacers, I do all my cleaning on a card table, and the reel does not move from the card table till it is fully reassembled, I would have noticed these parts.

I am having an issue with the spool tension knob. In order to get enough tension out of it to keep a 1/4 lure from pulling line out, I have to tighten it all the way down to just 3 or 4 clicks from being all the way tight. 2 clicks less and the lure will almost free fall and cause a sizable backlash when it hits the ground.

This started after a routine cleaning, at first I figured I over lubed it, so I removed all the lube and redid everything, same result.

That is some nice closeup shots of a reel!

I'm gonna try to get some shots of my reel like that. A Zebco.

Maybe not.

WingNutt, actually they are in the picture, I didn't remove them from the clicker. If you look at the picture where the tension knob is broken down you will see them covered in grease.

You do need them. They provide the proper spacing for the spool and increase the range of tension adjustments. If you need some and you happen to be in the San Antonio area stop by.

Matt do you have pic's like this for a Daiwa TDA153-HSTA? If you do cna you email them to me. rekost@sbcglobal.net

Thanks for the info.

Awesome pics Matt!! Thanks for sharing the info. I noticed after looking at your pics that I have been assembling my reels with the roller bearing bushing and spacer in reverse order - I am wondering if that is why some of my stx reels grind. There is a part (93) on the revo stx schematic that is not actually in any of my stx reels that i have been wondering about. It is not shown in your pics either so I guess it is an error in the schematic or a revision to the reel. What grease do you recommend for the stx? I have been using ardent reel butter, but it does not seem to lube the gears very well.

Ok so i know i could not complete this task and must give you major props on the pictures. My question is. I have cheap 30-50$ reels what would you recommend in maintenace, its not worth that crazy of a rebuild it would be cheaper to buy a new one

what kind of reel is it?

A pflueger baitcast, a shakespear baitcast, a shakespear spinning reel, and the other says south bend xtc 35 its a small spinning reel my dad gave me awhile back

Well thats good to know. I figured it would be more. But really i was wondering on preventative maintenace. All i have been doing is soaking them in freshwater after a trip in the salt but i have had some sqeaking as of late

Thats just my price, some places will charge anywhere from 10-25 bucks.

The best thing I know to do is get some Reel Magic and spray it down after a salt water trip