EZ Loader Vault hubs

EZ Loader Vault hubs #15280749 12/23/24 05:55 PM
Joined: Dec 2005 Posts: 4,364 NETX O ogles824 (aka Lakewaydr50) OP TFF Team Angler
OP ogles824 (aka Lakewaydr50) TFF Team Angler O Joined: Dec 2005 Posts: 4,364 NETX	I've got a 2013 EZ Loader Skeeter trailer with a 2013 ZX200 sitting on it and I noticed recently I had weird wear pattern on my right rear tire (tandem). The rest of the tires are wearing perfectly normal and this one is wore nearly out and has a pattern like it is scrubbing at an angle. Upon further investigating it a appears that I have slack in the bearings, the other three are fine. It has had a slight grease leak too, showing up on the wheels. Rotating it there is no noise and it is full of grease. I've tried tightening the adjustment but the nut has way to much pressure on the bearings by the time I get to the next notch in the nut. I looked at buying the kit to rebuild it and it looks like for just a little bit more I can buy the whole assembly and just change it out from the torque tube out. What is your experience with this? 2012 ZX200 Skeeter 2012 Yamaha 200 SHO Isaiah 40:31 "but those who hope in the Lord will renew their strength. They will soar on wings like eagles, they will run and not grow weary, they will walk and not be faint. Proud student of the Pro Staffer. https://www.youtube.com/watch?v=TzwF72B2F2w&t=14s

Re: EZ Loader Vault hubs [Re: ogles824 (aka Lakewaydr50)] #15280769 12/23/24 06:23 PM
Joined: Mar 2010 Posts: 28,061 Temple, TX. T Bird TFF Guru
T Bird TFF Guru Joined: Mar 2010 Posts: 28,061 Temple, TX.	Leaks don't ever get better. Replace hub or rebuild it. Okie by birth, Texan by choice. USAF "Thunderbirds" Alumni 1985-1989

Re: EZ Loader Vault hubs [Re: ogles824 (aka Lakewaydr50)] #15293003 01/06/25 06:24 PM
Joined: Feb 2002 Posts: 3,089 Lake Fork T Txduckhunter TFF Team Angler
Txduckhunter TFF Team Angler T Joined: Feb 2002 Posts: 3,089 Lake Fork	Originally Posted by ogles824 (aka Lakewaydr50) I've got a 2013 EZ Loader Skeeter trailer with a 2013 ZX200 sitting on it and I noticed recently I had weird wear pattern on my right rear tire (tandem). The rest of the tires are wearing perfectly normal and this one is wore nearly out and has a pattern like it is scrubbing at an angle. Upon further investigating it a appears that I have slack in the bearings, the other three are fine. It has had a slight grease leak too, showing up on the wheels. Rotating it there is no noise and it is full of grease. I've tried tightening the adjustment but the nut has way to much pressure on the bearings by the time I get to the next notch in the nut. I looked at buying the kit to rebuild it and it looks like for just a little bit more I can buy the whole assembly and just change it out from the torque tube out. What is your experience with this? Replaced the whole assembly on mine. Takes literally less than 10 minutes.

Hop To