Yes.

It is possible to connect more than one Livescope 32 transducer (LVS 32) to a chartplotter. In order to connect multiple LiveScope transducers to the chartplotter, you will need an additional LVS 32 transducer and GLS10.

In order to connect more than one Livescope to a system that is using ECHOMAP devices that only have one marine network port, you will need to use a GMS 10 port expander.

Thank you sir!

I have the cheapest Garmin 4 with GPS. Works pretty darn good has 77 and 200 frequency. shows way points and that works good too. Pretty amazing for so cheap $130, but I have seen it cheaper than that recently.

I just picked up a used 73 sv. And before I mount it I was trying to learn it . I can’t get to home screen . It is on screen in picture. It will go to screens affiliated with areas shown but not to sonar of any type . I am 99 percents sure it’s me messing up . I rebooted a few times with no luck. Any and all help appreciated. Thx. Eric
If you could please pine or text 972-740-1243. Calls sometimes get thru . Voicemail and text work well

i am taking a guess but maybe I need to attach transducer before it works properly ??

Sorry I don’t know anything about the echo maps but I found this video, hopefully it can help you .

I have two Garmin 12-inch 7612xsv head units for sale. All touch screen. Comes with power cord only, no transducers. $1000 each or $1800 for both.

My Echomap UHD 93sv doesn`t show the directional cone in the circle icon on the screen when I use livescope. What am I doing wrong or is it just turned off. I can get all the modes just no directional icon to show where the cone is pointing.

Its been a while since the LVS34 came out and im contemplating upgrading to it , but is there a 36 or newer technology about to come out and should i wait n see.

What transducer (s) will work with a Garmin Echomap SV 93, it came with a GT40 but says they'r no longer available,..???

I have a 12” Echomap with lvs-32 transducer that is only about 6 months old and all of a sudden it has what looks like a big log about mid water column that doesn’t allow me to see anything in the area where it shows up. I have it on a Tritoon boat for crappie fishing so I have never had it in any brush or weeds when fishing. What could cause this? I have the same setup on my bass boat that I’ve had for several years and it still works like new after all the beating it’s taken. Frustrating!

It depends. If it`s an Echomap Plus SV93 it will only support the GT40,&GT 52. but if it`s a Echomap UHD SV93 it will support the GT54 & the GT56 Ultra High Definition transducers. "UHD"

I tried finding this without any success. So, I apologize if this is a repost.

I'm looking for Garmin mapping software to put on my PC (actually it's an Apple).

What if any software are folks using to do e-scouting on the PC and transfer waypoints to Garmin units. I'm running 2 ECHOMAP 93SV UHD if that helps.

Thanks!
Dan

Don't know if you figure it out but most of us use Google earth for waypoint
scouting

I purchased a new 106sv on Black Friday at BPS. If someone needs a free set of gaskets for surface mounting on a console they can have mine that came with the unit for free. I have no need for them. Kind of hate to throw them in the trash. Must come to me to pick them up in Arlington, Texas. I will not ship them. Kirk 817-795-7446