2 years ago I mistakenly ordered a switch for my panel in amber not red. The switch feeds all the other switches on my panel so if I leave it on there is some draw. The amber is very hard to see. I have been searching for a new switch and trying to find one with the appropriate text in the correct configuration. I have been seeing ads for a company called New Wire. I found that they have a very limited selection and did not have anything to fit my specs. While searching I found OTRATTW. They have a great selection of switches and will customize text for a small fee.

I buy all my marine electrical gear from boatwireusa.com. They have what I need: tinned marine wire in bulk, or by the foot, switches, breakers, battery cable and connectors, and their shipping is quick and affordable. All my boat connections are soldered, sealed with liquid 'lectric tape, and shrink--tubed. Mandatory for salt water, and advisable for fresh water boating. Good luck! IslandJim

I always inject fittings and switches with dielectric Grease before the install, and as mentioned already, use only tinned wire if your adding or rewiring. It's like night and day difference how much better it works.