Does anyone have any good mounting ideas for mounting the 3 and 1 to their trolling motor? I bought the Minn Kota bracket but it's not working all that well. It's kind of a long transducer just wanted to see what yall have done. Thank you!

https://www.russellmarineproducts.com/rmp-l-style-transducer-trolling-motor-mount-rmp-ltm-1
I believe this is what i used.

I have got this one on order now.

This one works great!

I had a “ducer dolly” on mine. It was like $80.
Comfort troll.

The one pictured is for non-US2 trolling motors. The bottom pic is for the Ultrex with US2.



If you look at the second pic, you’ll understand why I don’t recommend an expensive transducer on the leading, bottom edge of a trolling motor. $340 per impact. It only takes one.

Precision Sonar mount.

Ahhh the boat that never sees the water....

To add to this thread...

I have TotalScan 2n1 already, bought the 3n1 for the added clarity and features. The 2n1 is mounted on the back of the boat, should I replace with 3n1, place the 3n1 near 2n1, or mount 3n1 on TM and keep 2n1?

Lolz!

At least mine will pass an inspection.

I have one of the Comfortroll "ducer dolly" things as shown above. Still new in the package. I bought it thinking i was going to go all lowrance when i replaced my electronics. I changed my mind and went all Garmin so I never even opened it.

It's yours if you want it. We don't live very close but if you want to PM my your address I'll send it to you.

Lolz

Transducer Shield Savers are bullet proof. https://www.transducershieldandsave...tal-scan-transducer-on-a-trolling-motor/