You spend a lot of money on your trolling motor and some of you have waited a long time to get your motor, so why not protect it?!

Any overhang (that sits down very close to the rub rail) can potentially cause damage to your trolling motor and boat. So why risk it? Be proactive and protect that expensive trolling motor - scroll down to view customer pictures.

Some people don't think about the overhang issues until something happens and damages their expensive trolling motor or worse, the force of the collision with the motor causes damage to the boat. No matter how careful you are, accidents can happen!

No matter what motor you have (Terrova, Ulterra, Ultrex, Rhodan, Fortrex, Powerdrive, Riptide, Edge, Xi3), we can help you easily and safely slide your motor inboard, keeping it safe from ANY outside obstacles and protecting it. Our mounts quickly slide the motor into the boat, makes it easier when transporting it, loading/unloading, pulling up to docks. Who wants to keep removing (and lifting) the motor using the quick release each time you unload/load the boat?!

Or do you have mounting challenges? Can't get the shaft close enough to clear the rub rail? We can also help! Our BMAP-RE reach extension plate will allow you to place our UHD mount SEVERAL inches back from the rub rail.

ShuttleSlide's RETRACTABLE quick release mounts help provide the PROTECTION your trolling motor deserves. Proudly made in the USA, veteran-owned. Message us today for more information, email: support@shuttleslide.com.

Discover our amazing products here: www.shuttleslide.com/shop

Do you already have your trolling motor installed and you don't want to drill more holes in your boat???? No problem - order a DPA-1 adapter plate from our shop, along with your ShuttleSlide and RE-USE your boat's existing hole pattern - no new holes in your deck!

Still want the option to take it off the boat? Our mounts all have a built-in quick release system so you don't need to purchase an additional one, but you can still choose to attach another quick release puck to our mount (simply requires a BMAP-54 adapter plate from us).

All hardware and brackets are stainless steel and metal plates made out of 6061-T6 aluminum.

Standard lengths are 7", 9" and 12", but custom lengths are available. We sell the HD and UHD models "by the inch". Some people need more retraction to avoid a cleat or other fixture on the boat.

The mount you need depends upon the size trolling motor you have (shaft length) and where you can get the first set of bolts secured through your deck. Our UHD mounts allow you to secure the first bolts through your deck at 6.5" inboard!!!!

Prices start at $189.99. Several models to choose to from.

Let us know what type of trolling motor you have and we can recommend a mount. A qualified technician can speak to you about your boat's configuration and mounting challenges. Open Monday - Saturday 8am-6pm ET www.shuttleslide.com/shop

⭐️⭐️⭐️⭐️⭐️

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]


~Sandy
ShuttleSlide - Retractable Trolling Motor Mounts with quick release
www.shuttleslide.com / 321-345-3315
www.facebook.com/shuttleslide
We solve annoying overhang issues - "Helping boaters protect their trolling motors"