Does anyone know of a fold up ladder for the new ZX models? Had to remove the standard foot pegs off the jackplate due to the power poles.

Appreciate it.

I used the R&R Design bracket to remount the ladder to the power pole bracket. Rather than drilling holes for a folding ladder just call your dealer. They should have it in stock or can source it quickly.

This

on mine,i just drilled another hole in the ladder after mounting my power poles and it sits about an inch lower but still works

How does the r & r actually perform? Once you get to the top peg is it a reachable step to the carpeted rear deck or are you stepping on the transmom?

It should be a pretty easy step. Remember you already have the grab handle from the factory.

R & R makes the ladder you pulled off and the bracket. They need to know you have series 2 poles and not the blades. The bracket is different for the series 2/ZX boats.

Dan, R&R is in Terrell, Tx. Might be worth stopping by one day if you are headed to Fork. they are off hwy 34 about 1.5mi N of 20. my stepdad has one of their emergency boarding kits on his jackplate of the new skeeter with power poles too

Appreciate it thanks...

For those of you with this ladder, did you go with the standard ladder 12�, or did you do the extended version, 26� or 27�? I�m wanting to order one but don�t know which one is necessary for a new Skeeter.