Forums59
Topics1,050,170
Posts14,153,234
Members144,436
|
Most Online39,925 Dec 30th, 2023
|
|
DIY Underwater Led Fishing Light
#11965425
12/04/16 03:47 PM
|
Joined: Oct 2016
Posts: 377
Banker Fisherman
OP
Angler
|
OP
Angler
Joined: Oct 2016
Posts: 377 |
Hello fellow slab seekers, With crappie season in full swing and also the holidays coming up, I wanted to make my father-in-law something that I know he has been wanting for a while. I had looked around at different options for green underwater led lights and they wanted some pretty high prices for what I was wanting. Since this is Texas, you go big or go home! This is a 600 diode, green led that is 24in long. I bought the tubing and led from Amazon. The rest was all bought at Home Depot. Totall cost for all this was right around $40. Now I already had some of the supplies, but even still it is considerably more affordable to what is out there.
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11965457
12/04/16 04:21 PM
|
Joined: Apr 2016
Posts: 683
PaPa@fork
Pro Angler
|
Pro Angler
Joined: Apr 2016
Posts: 683 |
Can't wait to try it out, you may have to get here before Christmas It looks nice, Thank you !!!
If it was easy, everyone would do it
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11965534
12/04/16 05:32 PM
|
Joined: Jan 2008
Posts: 538
Crappie Bait
Pro Angler
|
Pro Angler
Joined: Jan 2008
Posts: 538 |
what are all the materials used? Glue? Fittings? etc
Church of Christ One God - One Faith - One Church - One Doctrine - One Mind
|
|
Re: DIY Underwater Led Fishing Light
[Re: Crappie Bait]
#11965563
12/04/16 06:09 PM
|
Joined: Oct 2016
Posts: 377
Banker Fisherman
OP
Angler
|
OP
Angler
Joined: Oct 2016
Posts: 377 |
what are all the materials used? Glue? Fittings? etc 24in polycarbonate tubing in 2in diameter, 16ft of waterproof led strip in green, 2in pvc cap, 3/4 pvc cut to 23in length, 50ft of 16 gauge landscape electrical cord, 30 amp battery clamps, some super glue to make the led stick to the pvc pipe, and liquid nails clear silicone adhesive to glue it all together and to seal it.
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11966061
12/04/16 11:46 PM
|
Joined: Jun 2016
Posts: 6,854
V-Bottom
TFF Celebrity
|
TFF Celebrity
Joined: Jun 2016
Posts: 6,854 |
So, how did you add weight so it would sink?
Texas Anglers Recognition Program TPWD Official Weigh Station,77563 Coastal Bend Weigh Team, Cert. Weigh Master USMC66'- www.troutsupport.com
|
|
Re: DIY Underwater Led Fishing Light
[Re: V-Bottom]
#11966447
12/05/16 03:12 AM
|
Joined: Oct 2016
Posts: 377
Banker Fisherman
OP
Angler
|
OP
Angler
Joined: Oct 2016
Posts: 377 |
So, how did you add weight so it would sink? I thought about adding a piece of rebar down the middle of the 3/4 pvc that the led is wrapped around but it wouldn't be heavy enough. What I am going to do is get two more 2in pvc caps then get about 5in of 2in pvc and make a capsule out of that and then screw and glue it to the bottom. The capsule can be full of lead weights, rocks, sand, concrete, etc....whatever I can find to weigh it down.
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11966988
12/05/16 03:40 PM
|
Joined: Feb 2014
Posts: 73
xse
Outdoorsman
|
Outdoorsman
Joined: Feb 2014
Posts: 73 |
could they be hooked up to a low voltage transformer?
Mr. Ed
|
|
Re: DIY Underwater Led Fishing Light
[Re: xse]
#11967190
12/05/16 05:05 PM
|
Joined: Oct 2016
Posts: 377
Banker Fisherman
OP
Angler
|
OP
Angler
Joined: Oct 2016
Posts: 377 |
could they be hooked up to a low voltage transformer? Are you referring to having them hooked up to a wall outlet vs directly to a 12v battery? I know that it is possible. As long as the power going into the strip is at 12volts, it should power the strip. Now in regards to the amount of amps that the strip can handle, that I am not sure of. I have seen instructional videos of people taking old phone chargers or other device chargers that will convert 120v from an outlet down to 12v and just soldering the wires together to be able to just plug in the strip. If you do not have an old charger that can convert 120 down to 12 then you can find them online for usually $6-$10 or you could visit your local thrift shop and search around for some. Sorry If this all sounds very spotty. I am no electrician, but I am always up for trying something myself and learning as much as I can.
|
|
Re: DIY Underwater Led Fishing Light
[Re: xse]
#11967920
12/05/16 10:45 PM
|
Joined: Apr 2016
Posts: 683
PaPa@fork
Pro Angler
|
Pro Angler
Joined: Apr 2016
Posts: 683 |
could they be hooked up to a low voltage transformer? If it's 12v DC it will work
If it was easy, everyone would do it
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11968118
12/06/16 01:12 AM
|
Joined: Oct 2016
Posts: 144
Ranger481
Outdoorsman
|
Outdoorsman
Joined: Oct 2016
Posts: 144 |
The whole 16' strip will fit on the 23" 3/4 PVC?
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11968153
12/06/16 01:29 AM
|
Joined: Sep 2016
Posts: 17
Cattle15
Green Horn
|
Green Horn
Joined: Sep 2016
Posts: 17 |
Fish just jump in the boat
|
|
Re: DIY Underwater Led Fishing Light
[Re: Ranger481]
#11968174
12/06/16 01:35 AM
|
Joined: Oct 2016
Posts: 377
Banker Fisherman
OP
Angler
|
OP
Angler
Joined: Oct 2016
Posts: 377 |
The whole 16' strip will fit on the 23" 3/4 PVC? The reason I cut it to 23in was so that there would be room for the extra wire to fit inside the tube with out crimping or from keeping the caps from closing all the way. If you loop the strip tightly together it will cover about 21in of the pvc. If you have a little space between the loops for each time you wrap it around the pvc, then it will cover all 23in of the pipe....but I would not want to worry about spacing it just right, cause you could have it be to long and then run out of pvc. Also, even though you have 24in of clear tube, the caps will cover a little over an inch on each end. So I lift the 3/4in pvc bare a little on each end so that all of the led strip would be visible and not obstructed.
|
|
Re: DIY Underwater Led Fishing Light
[Re: Cattle15]
#11968177
12/06/16 01:36 AM
|
Joined: Oct 2016
Posts: 377
Banker Fisherman
OP
Angler
|
OP
Angler
Joined: Oct 2016
Posts: 377 |
That's an awesome example of another way to use the led strip lighting, clean install by the way!
|
|
Re: DIY Underwater Led Fishing Light
[Re: Banker Fisherman]
#11968957
12/06/16 03:01 PM
|
Joined: Oct 2004
Posts: 38,967
chickenman
1:28
|
1:28
Joined: Oct 2004
Posts: 38,967 |
Well done. I will attempt this sometime.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|