Excellent, you did really nice work there. I especially like your choice of using a textured deck paint rather than using carpet.

Looks like a flight deck now. You could land a 747 on the deck

If you have ever seen me stumble from the front of the boat the back you would understand!

Ok the rain stopped and I got to put some paint down. First impression is this stuff is THICK!!

It goes on smooth and fills small cracks.

I got the first coat on the two sheets. I also painted a couple pieces that I'll make a trolling motor mount from later.

And 4-1/2 later I just placed the second coat on going the opposite direction .


I got some paint on my hands but it comes off pretty easy with warm soapy water and a little scrubbing.

I like it a lot!

I haven't screwed the plywood down yet so it looks uneven right now. The appearance on the wood itself is pretty nice.

Looks like an aircraft carrier. Nice work!

Looking good!

Awesome!!

After mounting the frame/ 3/4" plywood to the Jon I put a couple 2x4 blocks under the plywood and mounted the front seat base.

Then shot a few small screws to mount the live well lid. I'll most likely come back with larger screws. I'll also be putting a cushion lid cover for my granddaughter to sit on.

Now you can't have a noisy lid slamming down while your fishing. So I put some marine weatherseal on the inside of the lid.



It's not near as loud when the lid is closed now.