|
Forums59
Topics1,039,764
Posts13,969,980
Members144,217
| |
Most Online39,925
Dec 30th, 2023
|
|
 90 hp evinrude questions
#7351015
03/29/12 05:38 PM
|
Joined: Feb 2012
Posts: 86
Camjack65
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Feb 2012
Posts: 86 |
Hey guys I have a 90 hp evinrude and we haven't fully started it but we tried to just turn it over and when i turn the key the starter spins but doesn't kick up to turn the motor over and start. Any ideas on what it might be? Starter maybe?
"you miss 100% of the shots you never take"
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7351042
03/29/12 05:42 PM
|
Joined: Mar 2012
Posts: 12
Scott Alvey
Green Horn
|
|
Green Horn
Joined: Mar 2012
Posts: 12 |
Make sure your connections are good and you have close ton12 volts to your starter before you replace it! Check your voltage between positive and negative on a volt meter at d/c voltage?
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7351048
03/29/12 05:43 PM
|
Joined: Mar 2012
Posts: 12
Scott Alvey
Green Horn
|
|
Green Horn
Joined: Mar 2012
Posts: 12 |
Sorry, close to 12 volts d/c
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7351087
03/29/12 05:56 PM
|
Joined: Mar 2012
Posts: 12
Scott Alvey
Green Horn
|
|
Green Horn
Joined: Mar 2012
Posts: 12 |
Sometimes the solenoid engages the starter appendix, could be that as well?
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7351325
03/29/12 06:54 PM
|
Joined: Feb 2002
Posts: 2,083
SoonerDG
Extreme Angler
|
|
Extreme Angler
Joined: Feb 2002
Posts: 2,083 |
sounds like the bendix is bad.
"Life is a matter of luck and the odds of success are in no way enhanced by extreme caution." - Erich Topp, German U-boat Commander, 1943.
When in doubt, set the hook.
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7351520
03/29/12 07:48 PM
|
Joined: Oct 2007
Posts: 32
turtleboy5
Outdoorsman
|
|
Outdoorsman
Joined: Oct 2007
Posts: 32 |
you have a pm click on flashing letter at top
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7354790
03/30/12 03:52 PM
|
Joined: Feb 2012
Posts: 86
Camjack65
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Feb 2012
Posts: 86 |
"you miss 100% of the shots you never take"
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7355029
03/30/12 04:53 PM
|
Joined: Feb 2009
Posts: 1,567
redwigglr
Extreme Angler
|
|
Extreme Angler
Joined: Feb 2009
Posts: 1,567 |
on the bendix spray some lube on it & slide it up & down by hand. starts rusting up, mine does it all the time
Keep them boats running and tight lines.
Thanks mike
|
|
|
Re: 90 hp evinrude questions
[Re: Camjack65]
#7367607
04/03/12 02:41 AM
|
Joined: Feb 2005
Posts: 106
Riddler
Outdoorsman
|
|
Outdoorsman
Joined: Feb 2005
Posts: 106 |
Hey guys I have a 90 hp evinrude and we haven't fully started it but we tried to just turn it over and when i turn the key the starter spins but doesn't kick up to turn the motor over and start. Any ideas on what it might be? Starter maybe? Spray some WD40 on the gear shaft. Many times they get gummed up and stuck so they won't spin up. Keep it lubed and you should not have the problem anymore.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
