Is the rod sox material over the cables on the console mounted HB side imagers just some cut up socks or somewhere u can order them from. I though about cutting a sox up but what do you do to keep it from unraveling (burn the ends or double the end and stitch it). Its makes for a clean look and looks to protect the wires also.

you should be able to by it at your local automotive store.Or a marine place will sell it by the foot.

Alltex Electronics off of Midway Rd. in Addison will have a variety of things you can look at to use. They are accros the road from the airport on a side road. Cant remember the name of the road.

It is actually wire covering you can get at a car audio place. It is quite a bit smaller than a rod sock. After you cut it you can melt it a little with a lighter and it will not unravel. I did it over a year ago and it is still working perfectly.

Jason

Cool thanks

This is actually what I have done!

The original use for this material was to cover most types of wiring. Electrical supply companys sell it in many sizes,colors, and by the foot. Cut it with a hot wire or melt as the other post said.

BTM

After fishing in grnhead 11's boat, I followed suit and did the same. Looks good and protects.