There was a guy on here that was selling the supplies needed. Anyone know who it was? I am ready to get rolling on this.

I know there is a place in Weatherford on the North side of the interstate that sells them.

This is what I used.

http://www.kemistain.com/

Roller - did you do it yourself, or have them do it for you?

I just purchased a kit from Home Depot last week - less than $100. The name of the company is Behr Process.

Behr Process Corp

Haven't used it yet but the video makes it seem like a breeze.

EN591 - I am looking at doing the floor in my kitchen and dining room.

I dont think that is acid stain, Acid stain is what i do,and you better have someone that knows how, or you will get into trouble.good luck!!!!

Dirty Bass

I did it myself, but understand what pkskeeter is saying. We completely redid our kitchen. Removed the tile and as much thinset as possible, poured an overlay, stained it and finally sealed it. Each step took 24 hours to do. It was a four day job and very dusty removing the tile.

I didn't worry about splattering the walls because we were repainting when we were done. If you are not going to repaint or put down new baseboard, then you will need to tape everything off. Use plastic about 2-3 feet up the wall. No matter how careful you are, you will splatter on the walls.

I had help from someone who does this for a living, so all my questions were answered while we were doing it.

Decosup ( Deco Supply ) East of 635 off of I-30 sells stain. If you need help, send me a PM and I can talk you through it.

Jeff

I sell the material and can instruct you on how to do the work. Pm me.

Let us know how it turns out !!!!

I had Conover Painting do my grarage and patio. Great work!!!

PM sent Dirty Bass

replied