|
Forums59
Topics1,039,366
Posts13,963,409
Members144,202
| |
Most Online39,925
Dec 30th, 2023
|
|
 Help with mapping and Navionics Chip on Lowrance Carbon
#14980199
02/06/24 10:05 PM
|
Joined: Oct 2006
Posts: 7,479
Hook'Em 79
OP
TFF Celebrity
|
|
OP
TFF Celebrity
Joined: Oct 2006
Posts: 7,479 |
So my setup is 2 carbons at console and one at the bow. I have them all networked together and towards the end of last year I noticed that the graph I use for mapping the Navionics map would cut in and out
and the graph would reset back to whatever the default mapping system was for Lowrance. Then the navionics chart would show back up and then go through it the same process at random all day.
Has this ever happened to anyone else? I don't have a chip in all units but I do have a chip in the main graphing unit that I use mapping.
Hope this all makes sense.
|
|
|
Re: Help with mapping and Navionics Chip on Lowrance Carbon
[Re: Hook'Em 79]
#14980257
02/06/24 11:08 PM
|
Joined: Dec 2008
Posts: 16,196
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 16,196 |
Put the card in the other sd slot, if it still happens, might be a loose/bad Ethernet cable.
|
|
|
Re: Help with mapping and Navionics Chip on Lowrance Carbon
[Re: Hook'Em 79]
#14980270
02/06/24 11:23 PM
|
Joined: May 2003
Posts: 16,322
Chris B
TFF Guru
|
|
TFF Guru
Joined: May 2003
Posts: 16,322 |
Try moving the card to a different graph.
![[Linked Image]](https://texasfishingforum.com/forums/pics/usergals/2017/07/full-3769-170037-image.png) I hate photobucket.
|
|
|
Re: Help with mapping and Navionics Chip on Lowrance Carbon
[Re: Hook'Em 79]
#14980345
02/07/24 12:33 AM
|
Joined: Oct 2006
Posts: 7,479
Hook'Em 79
OP
TFF Celebrity
|
|
OP
TFF Celebrity
Joined: Oct 2006
Posts: 7,479 |
I’ve tried it in different graphs but I’m not sure if I have tried different slots.
I even unplugged the network cable and it still does it.
|
|
|
Re: Help with mapping and Navionics Chip on Lowrance Carbon
[Re: Hook'Em 79]
#14980448
02/07/24 01:50 AM
|
Joined: May 2002
Posts: 5,042
leethefishking
TFF Celebrity
|
|
TFF Celebrity
Joined: May 2002
Posts: 5,042 |
Clean the card contacts with some rem oil. Also sounds like it’s just loose though, so another slot should be fine.
|
|
|
Re: Help with mapping and Navionics Chip on Lowrance Carbon
[Re: Hook'Em 79]
#14982594
02/09/24 02:57 AM
|
Joined: Dec 2017
Posts: 228
cjbles
Outdoorsman
|
|
Outdoorsman
Joined: Dec 2017
Posts: 228 |
I’ve seen this happen with my Lowrance Live models. Clean the connectors and card.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
