I have a 1996 ranger with same year ranger trail trailer. After a long round trip home from Oklahoma I had realized my side bump bunk was missing along with the bracket I have one left and would like to replace the missing one. Any ideas on where to find one or any ideas how to rig something similar up?

I had a 95 ranger that I gave to my son, same issue. I suggest removing all of old, design and build new for both sides. If you have some tool and can work with your hands, (bet you can) you can build something . Doubt you can find factory replacement.

1-800-724-7273 is the number for Ranger Boats. Ask for the Parts Department. Have the serial number of your trailer ready. I don't know if they will have something for a 25 year old trailer, but you might be surprised.

I have a 2001 and Ranger parts has always been top notch in supplying parts.

What does the other side look like?

Just replaced both sides on my trailer. I just cut 4 pieces of all thread and cut a 2x6 for each side. 4 pieces of all thread, 8 bolts, 8 washers and 4 pieces of pvc to cover the all thread. Pretty simple to do. Oh, and a little bit of carpet to cover the boards. Also drill the holes a little smaller than the all thread and hammer them in, they will hold.