Forums59
Topics1,039,911
Posts13,972,102
Members144,222
|
Most Online39,925 Dec 30th, 2023
|
|
Problems with 898c si
#12588437
01/21/18 06:44 PM
|
Joined: Sep 2008
Posts: 993
D.Brock
OP
Pro Angler
|
OP
Pro Angler
Joined: Sep 2008
Posts: 993 |
I have a 997c on my console and I recently purchased a used 898c si that has about 400 hours on it. When I hooked up the 898 to my console the down image has lines all over the image. I didnt get a picture of it but found one online that looks just like what mine does. What would cause that.
http://forums.sideimagingsoft.com/index.php?action=dlattach;topic=4921.0;attach=7489
Also there is a connection to link the 898 but my 997 dont have one. Is there a way to link them together?
Last edited by D.Brock; 01/21/18 06:48 PM.
Daniel
|
|
Re: Problems with 898c si
[Re: D.Brock]
#12589266
01/22/18 01:21 AM
|
Joined: Nov 2010
Posts: 5,103
Wayne P.
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,103 |
The 997 can be linked to both 898c SI models with the discontinued AS INTERLINK accessory. They would only share waypoints and a GPS antenna. INTERLINK was discontinued and no longer supported when the XX9 models came out.
The 898's supports Ethernet also.
Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3, Helix 8 MEGA SI+ GPS G4N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1
|
|
Re: Problems with 898c si
[Re: D.Brock]
#12590921
01/23/18 12:04 AM
|
Joined: Sep 2008
Posts: 993
D.Brock
OP
Pro Angler
|
OP
Pro Angler
Joined: Sep 2008
Posts: 993 |
Wayne do you know what would cause the lines.
Daniel
|
|
Re: Problems with 898c si
[Re: D.Brock]
#12591055
01/23/18 01:13 AM
|
Joined: Dec 2012
Posts: 6,687
44 Diesel
TFF Celebrity
|
TFF Celebrity
Joined: Dec 2012
Posts: 6,687 |
I have a 997c on my console and I recently purchased a used 898c si that has about 400 hours on it. When I hooked up the 898 to my console the down image has lines all over the image. I didnt get a picture of it but found one online that looks just like what mine does. What would cause that.
http://forums.sideimagingsoft.com/index.php?action=dlattach;topic=4921.0;attach=7489
Also there is a connection to link the 898 but my 997 dont have one. Is there a way to link them together? most likely a bad transducer or head unit. I am assuming you put the 898 at the console using the 997 transducer. If not swap the units and transducer around and troubleshoot from there
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|