Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
hillcountrybass, Linda Robert, Gnhattien, Robert black, Calexander
102726 Registered Users
Top Posters
TexDawg 82883
hopalong 74403
Pilothawk 73443
JDavis7873® 67377
FattyMcButterpants 60518
John175 ® 59904
Tritonman 56835
Derek 56432
SkeeterRonnie 52463
LoneStarSon® 52225
facebook
Forum Stats
102726 Members
61 Forums
859239 Topics
11272313 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11780502 - 08/16/16 04:40 PM I Pilot and Hum 859
Ray Hubbard Guide- J.V. Offline


Registered: 06/07/01
Posts: 9852
Installed a 859 .. when on anchor I get interference.. do the inline noise filters work ? It is hooked into the built in transducer ...

Top
#11780573 - 08/16/16 05:10 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
shut-up-and-fish Offline
TFF Celebrity

Registered: 02/08/10
Posts: 9102
Loc: Coppell Tx.

Is your 859 wired straight to the starting battery or somewhere up in the bow area with the trolling motor?

Wire direct to the starting battery and contact Humminbird and they will send you a ferrite ring

1st option wire to starting battery
2nd option only after 1st option is ferrite ring.

Also I have seen where the Humminbird unit was moved away (to the right) from the trolling motor 4" and the unit cleared up.
_________________________


It's all coming together and we have you covered @ Shut-Up-And-Fish LLC
for all your Humminbird, Minn Kota & Motorguide needs.
We install & educate as well!!! 972 737 8161


Top
#11781161 - 08/16/16 09:29 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
Ray Hubbard Guide- J.V. Offline


Registered: 06/07/01
Posts: 9852
David , it is wired straight to the starting battery .. And the head unit is on the dash and far away from the trolling motor ..

Top
#11783307 - 08/17/16 09:30 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
shut-up-and-fish Offline
TFF Celebrity

Registered: 02/08/10
Posts: 9102
Loc: Coppell Tx.

I have not ever put a ferrite ring on the adpter cable for the US2 transducer. Not sure why you are getting interference. Seems you have everything connected correctly.

Try going into menu and switching 2D to the US2 transducer if there is an option on that unit. I can't recall...
_________________________


It's all coming together and we have you covered @ Shut-Up-And-Fish LLC
for all your Humminbird, Minn Kota & Motorguide needs.
We install & educate as well!!! 972 737 8161


Top
#11783374 - 08/17/16 09:52 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
44 Diesel Online   content
TFF Team Angler

Registered: 12/25/12
Posts: 3432
Loc: Burleson,TX
Interference can be caused by many things such as cable routing, worn brushes and water intrusion from the trolling motor, on board battery chargers. The ferrites are just one remedy that can work for some and not others. Its a process of elimination. One of the most common solutions is to separate the trolling motor power cables away from the transducer cable if possible

Top
#11784713 - 08/18/16 05:16 PM Re: I Pilot and Hum 859 [Re: 44 Diesel]
Ray Hubbard Guide- J.V. Offline


Registered: 06/07/01
Posts: 9852
Originally Posted By: 44 Diesel
Interference can be caused by many things such as cable routing, worn brushes and water intrusion from the trolling motor, on board battery chargers. The ferrites are just one remedy that can work for some and not others. Its a process of elimination. One of the most common solutions is to separate the trolling motor power cables away from the transducer cable if possible


They are not together.. trolling motor wires are on the right side from center console and transducer wire ( 30 ft ) is on the left .. now , they are close right in the center where they com into the console.. I cant help that.. when I say interference, better description is it fades .. like I lose some of the signal.. not like lines straight up and down interference, if that makes any sense .. and when I am on the anchor feature..

Top
#11784841 - 08/18/16 07:15 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
44 Diesel Online   content
TFF Team Angler

Registered: 12/25/12
Posts: 3432
Loc: Burleson,TX
Which Minn Kota do you have? The late model minn kotas have a fuse in the head that is for thi issue.

Top
#11784853 - 08/18/16 07:23 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
44 Diesel Online   content
TFF Team Angler

Registered: 12/25/12
Posts: 3432
Loc: Burleson,TX
This is a fuse



this is from a terrova


Edited by 44 Diesel (08/18/16 07:26 PM)

Top
#11787861 - 08/20/16 03:12 PM Re: I Pilot and Hum 859 [Re: 44 Diesel]
Ray Hubbard Guide- J.V. Offline


Registered: 06/07/01
Posts: 9852
Originally Posted By: 44 Diesel
Which Minn Kota do you have? The late model minn kotas have a fuse in the head that is for thi issue.


I have the Ternona .. It's about 3.5 yrs old .. Do I need to check to see if mine has the fuse ?

Top
#11787900 - 08/20/16 03:45 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
44 Diesel Online   content
TFF Team Angler

Registered: 12/25/12
Posts: 3432
Loc: Burleson,TX
It will have the fuse, check and see if it is blown

Top
#11788805 - 08/21/16 11:10 AM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
Allan W Offline
Extreme Angler

Registered: 09/04/09
Posts: 1166
Loc: EM Lake
Originally Posted By: Ray Hubbard Guide- J.V.
David , it is wired straight to the starting battery .. And the head unit is on the dash and far away from the trolling motor ..


Humminbird makes a in line choke you run the TM power through as close to and before the TM. I have used it several times on several different boats to eliminate the problem you describe. They were also wired straight to the battery and the choke eliminated the interference.

Top
#11788931 - 08/21/16 12:52 PM Re: I Pilot and Hum 859 [Re: Allan W]
Wayne P. Offline
TFF Team Angler

Registered: 11/16/10
Posts: 3443
Loc: Charlottesville, Va
Originally Posted By: Allan W
Originally Posted By: Ray Hubbard Guide- J.V.
David , it is wired straight to the starting battery .. And the head unit is on the dash and far away from the trolling motor ..


Humminbird makes a in line choke you run the TM power through as close to and before the TM. I have used it several times on several different boats to eliminate the problem you describe. They were also wired straight to the battery and the choke eliminated the interference.



TMC-1


_________________________
Humminbird Helix 12 CHIRP SI, 1198c SI, 1198c SI, ONIX 10 SI NT, Helix 7 CHIRP SI GPS G2, 360, RC-1

Top
#11804677 - 08/30/16 01:44 PM Re: I Pilot and Hum 859 [Re: Wayne P.]
Ray Hubbard Guide- J.V. Offline


Registered: 06/07/01
Posts: 9852
Originally Posted By: Wayne P.
Originally Posted By: Allan W
Originally Posted By: Ray Hubbard Guide- J.V.
David , it is wired straight to the starting battery .. And the head unit is on the dash and far away from the trolling motor ..


Humminbird makes a in line choke you run the TM power through as close to and before the TM. I have used it several times on several different boats to eliminate the problem you describe. They were also wired straight to the battery and the choke eliminated the interference.


TMC-1





That hooks to the trolling motor ? What gage wire is that ? My graph is not close to the trolling motor .. It's on my dash ..

Top
#11805110 - 08/30/16 06:29 PM Re: I Pilot and Hum 859 [Re: Ray Hubbard Guide- J.V.]
44 Diesel Online   content
TFF Team Angler

Registered: 12/25/12
Posts: 3432
Loc: Burleson,TX
correct it does connect to trolling motor to reduce the RFI, wire is 10 gauge

Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide