Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
JLawArch, Mac T, NateTheGreat, RattleTrapChick, Bmoody82
105150 Registered Users
Top Posters
TexDawg 85223
hopalong 77675
Pilothawk 74795
JDavis7873® 67382
John175 ® 63743
FattyMcButterpants 60667
Derek 🐝 57782
Tritonman 57476
SkeeterRonnie 52917
LoneStarSon® 52902
facebook
Forum Stats
105150 Members
60 Forums
844877 Topics
12047020 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11746833 - 07/28/16 01:23 PM Steering Cable
mikemtx Offline
Outdoorsman

Registered: 11/07/10
Posts: 61
Loc: Mesq. TX
Hit a stump and bent the steering cable on a 94 skeeter ss90 with a 90 hp Johnson. Has anyone replaced one and how hard a job is it? Anyone on the forum sell them?

Top
#11747514 - 07/28/16 08:01 PM Re: Steering Cable [Re: mikemtx]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11042
Loc: Littlefield Tx & Lake A. H. US...
Not to bad. May have to remove the outboard motor. Should be a cable number about 18 inch`s from the motor end.
_________________________
“The world will not be destroyed by those who do evil, but by those who watch them without doing anything” Remember what He has done and remember that He is not done yet! GOD IS GOOD

Top
#11748611 - 07/29/16 12:22 PM Re: Steering Cable [Re: mikemtx]
Stump jumper Offline
TFF Celebrity

Registered: 04/19/04
Posts: 7308
Loc: Rockwall
Like Gary says it is not too bad. Crawling under the dash is the worst part. Tie a rope to the motor end when you pull the old one out. Most numbers are on the motor end but I did have one cable were it was on the helm end. Hopefully you have the clearance with out having to pull the motor. Get the number and get on Amazon or WHolesale Marine.

Top
#11757481 - 08/03/16 07:33 PM Re: Steering Cable [Re: mikemtx]
mikemtx Offline
Outdoorsman

Registered: 11/07/10
Posts: 61
Loc: Mesq. TX
I had to cut the old cable by the shaft to pull the cable out to see the number on the cable. Ordered a new cable and helm from Amazon. Going to rent an engine hoist to lift the motor up to get the old steering shaft out and put the new one in. Thanks for all the tips guys!

Top
#11758543 - 08/04/16 12:23 PM Re: Steering Cable [Re: mikemtx]
Stump jumper Offline
TFF Celebrity

Registered: 04/19/04
Posts: 7308
Loc: Rockwall
Originally Posted By: mikemtx
I had to cut the old cable by the shaft to pull the cable out to see the number on the cable. Ordered a new cable and helm from Amazon. Going to rent an engine hoist to lift the motor up to get the old steering shaft out and put the new one in. Thanks for all the tips guys!
heck get a come along and find a good sturdy tree branch with some shade under it. 90 Johnson probably weighs 250?

Top
#11761228 - 08/05/16 10:18 PM Re: Steering Cable [Re: mikemtx]
nitro1997 Offline
Outdoorsman

Registered: 04/14/15
Posts: 241
Just replaced my rack and pinion steering. Not to bad of a job. Couple of things learned. Make sure you completely clean out the tube. It will make your life a lot easier. I had to jack the back end of the trailer up to get enough clearance to put the engine back on.

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide