Forums59
Topics1,039,271
Posts13,962,003
Members144,197
|
Most Online39,925 Dec 30th, 2023
|
|
Aluminum Deck Non Skid Coating
#11563548
04/25/16 01:16 PM
|
Joined: Sep 2008
Posts: 1,802
Tx Tree Grower
OP
Extreme Angler
|
OP
Extreme Angler
Joined: Sep 2008
Posts: 1,802 |
I have a G3 1860 aluminum boat. The deck gets super hot in the summer. Been thinking about applying one of the light colored non skid marine products like Durabak or Tuff Coat. Has anyone ever used these or similar products on aluminum? Would love to hear about their durability if you have. Also, I have read a million different things on prep work. Some say prime, some say self etching prime, some say sand, some say sand blast. Thanks in advance for any tips on this.
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#11563684
04/25/16 02:04 PM
|
Joined: Jan 2005
Posts: 17,030
Pat Goff
TFF Guru
|
TFF Guru
Joined: Jan 2005
Posts: 17,030 |
Safe floor is the best, then there's everything else. If you're planning on keeping your boat a while, I'd be looking at that.
Pat Goff Seadrift TX
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#11563782
04/25/16 02:43 PM
|
Joined: Aug 2011
Posts: 2,957
Bob Landry
Extreme Angler
|
Extreme Angler
Joined: Aug 2011
Posts: 2,957 |
Safe Floor is the best, however, should you ever need to take up any of the floor to repair cracked horizontal rib repairs, that could be an issue. I had to have welds repaired on the G3 I had, but was able to access them by removing the storage bin liners from the front deck. Just think about all of the "what ifs" before you do somethin ghat might be expensive to repair or replace if need be.
2015 Seaark 1872 MV CC Etec-90 Two Helix 12 CHIRP SI's, , MinnKota Riptide ST80/i-pilot Link, Bob's Hydraulic 2020 Robalo R200 CC, Yamaha 150
Bitter Gun Owner Bitter Clinger Armed Infidel
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Pat Goff]
#11563819
04/25/16 02:56 PM
|
Joined: Jun 2011
Posts: 2,733
militarybrat
Extreme Angler
|
Extreme Angler
Joined: Jun 2011
Posts: 2,733 |
Safe floor is the best, then there's everything else. If you're planning on keeping your boat a while, I'd be looking at that.
This by the time you purchase the coatings put in the prep time and finish having safe floor installed would be the same cost. I'm playing with marine coatings now on my trolling motor. The aluminum end caps with steel center Have to be Etched before any coating is applied. Not a difficult process as long as you are ok working with acid. Then come the skill of working a spray gun easy for me not so easy for a lot of people. Brushing any coating on metal is cheesey to say the least as the brush marks will always be there. If you chose to do it yourself follow all instructions from the coating manufacturer as in Etch,Prime,And apply finish. Get the safe floor it is what I am going to do in my boat.
Who ever said nothing in life is impossible. Never tried slamming a revolving door.
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#11563866
04/25/16 03:16 PM
|
Joined: Jan 2005
Posts: 17,030
Pat Goff
TFF Guru
|
TFF Guru
Joined: Jan 2005
Posts: 17,030 |
There's some guides here with 4-5 year old rigs, they get used 300 days a year by less than careful people, their floors look new. That convinced me.
Pat Goff Seadrift TX
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#11669612
06/15/16 08:33 PM
|
Joined: Mar 2004
Posts: 273
fishin1228
Angler
|
Angler
Joined: Mar 2004
Posts: 273 |
Hey Tx Tree grower what did ya decide to go with ?
Last edited by fishin1228; 06/15/16 08:34 PM.
The Last Floor You'll Ever Haveta Worry About For Your Boat , Deck , or Patio
Lynn Watkins fishin15_1959@msn.com North Texas 972-567-5275
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#11678318
06/20/16 07:03 PM
|
Joined: Aug 2015
Posts: 106
Wildkow
Outdoorsman
|
Outdoorsman
Joined: Aug 2015
Posts: 106 |
Hope he went with the Safe-Floor it is great stuff! It's tough and easy to clean. My Champion 202 Bass & Bay has it and I love it! 47.5% White, 47.5% Grey and 5% Black Before After
Last edited by Wildkow; 06/20/16 07:10 PM.
|
|
Re: Aluminum Deck Non Skid Coating
[Re: fishin1228]
#11681554
06/22/16 12:48 PM
|
Joined: Sep 2008
Posts: 1,802
Tx Tree Grower
OP
Extreme Angler
|
OP
Extreme Angler
Joined: Sep 2008
Posts: 1,802 |
Hey Tx Tree grower what did ya decide to go with ? Honestly I've been so busy I have not had a chance to do anything. I'm going to try to get an appointment to get the safe floor put in. Hopefully I will have time to get it to Dallas in the next week or so. The pics you guys posted look amazing. I can only imagine how much cooler that floor is in the summer.
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#11682201
06/22/16 05:10 PM
|
Joined: Mar 2004
Posts: 273
fishin1228
Angler
|
Angler
Joined: Mar 2004
Posts: 273 |
sounds Great TX . If you need me to meet ya half way , I will . Thanks for the great words and thanks for postin the pics of your great lookin Chanpion Wildkow . It is Texas and everything will get hot when its 100 outside but all ya do is throw a little water on it and its alot cooler and it's still non-slip . you'll want all the aluminum dome just to keep it cooler
The Last Floor You'll Ever Haveta Worry About For Your Boat , Deck , or Patio
Lynn Watkins fishin15_1959@msn.com North Texas 972-567-5275
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Wildkow]
#12073260
02/02/17 09:03 PM
|
Joined: Mar 2004
Posts: 273
fishin1228
Angler
|
Angler
Joined: Mar 2004
Posts: 273 |
Hope he went with the Safe-Floor it is great stuff! It's tough and easy to clean. My Champion 202 Bass & Bay has it and I love it! 47.5% White, 47.5% Grey and 5% Black Before After Thanks for postin the pics Bud ..... glad your happy with it
The Last Floor You'll Ever Haveta Worry About For Your Boat , Deck , or Patio
Lynn Watkins fishin15_1959@msn.com North Texas 972-567-5275
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#12076032
02/04/17 03:45 AM
|
Joined: Jun 2016
Posts: 6,854
V-Bottom
TFF Celebrity
|
TFF Celebrity
Joined: Jun 2016
Posts: 6,854 |
I had my Wellcraft done with Safe Floor at the Pearland Shop years ago. 1/4" think, bow to stern. None of it has peeled or pulled loose. Great on the feet. Mine is the Bluish colored floor. Never go wrong with this stuff. Jacks up trade-in value too.
Texas Anglers Recognition Program TPWD Official Weigh Station,77563 Coastal Bend Weigh Team, Cert. Weigh Master USMC66'- www.troutsupport.com
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#12076052
02/04/17 03:55 AM
|
Joined: Mar 2004
Posts: 273
fishin1228
Angler
|
Angler
Joined: Mar 2004
Posts: 273 |
Thank Ya V-Bottom for the great words . Its been around down there for over 25 yrs. My partner in the company had his boat down there and we decided to buy into it and bring it to north Texas ..... so far so good up here after 4 years .
The Last Floor You'll Ever Haveta Worry About For Your Boat , Deck , or Patio
Lynn Watkins fishin15_1959@msn.com North Texas 972-567-5275
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#12076649
02/04/17 07:17 PM
|
Joined: Jun 2016
Posts: 6,854
V-Bottom
TFF Celebrity
|
TFF Celebrity
Joined: Jun 2016
Posts: 6,854 |
Your very welcome. I have one question. Can another layer be added to the original material? Over the years my floor has acquired some stains etc. Just want to brighten it up a bit.
Texas Anglers Recognition Program TPWD Official Weigh Station,77563 Coastal Bend Weigh Team, Cert. Weigh Master USMC66'- www.troutsupport.com
|
|
Re: Aluminum Deck Non Skid Coating
[Re: Tx Tree Grower]
#12080381
02/06/17 09:29 PM
|
Joined: Mar 2004
Posts: 273
fishin1228
Angler
|
Angler
Joined: Mar 2004
Posts: 273 |
i posted ya a reply on the other topic . but on 2nd thought it might be able to be cleaned real good and another layer of epoxy brushed on it to brighten it up . have you talked with Ed or Brandon in houston ?
The Last Floor You'll Ever Haveta Worry About For Your Boat , Deck , or Patio
Lynn Watkins fishin15_1959@msn.com North Texas 972-567-5275
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|