texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
BX19gti, Likesfishing, db89, OlePhart11, Rick P
119199 Registered Users
Top Posters(All Time)
TexDawg 119,880
Bigbob_FTW 95,524
John175☮ 85,945
Pilothawk 83,279
Bob Davis 82,755
Mark Perry 72,532
Derek 🐝 68,324
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,039,306
Posts13,962,624
Members144,199
Most Online39,925
Dec 30th, 2023
Print Thread
Boat issue #11575463 04/30/16 09:49 PM
Joined: Feb 2013
Posts: 95
W
wtr Offline OP
Outdoorsman
OP Offline
Outdoorsman
W
Joined: Feb 2013
Posts: 95
Took out the boat today and the motor didn't seem right. When we took off we just didn't have much power and it took awhile to get to full speed. When we got to our first spot we had a good size gas/oil slick behind motor. And when we were loading the boat we barely had enough power to get the boat on the trailer. Boat started right up and when we finally got to full speed it seemed fine just didn't have much power today. Any ideas? Thanks


PB: 12.05lbs OH Ivie
Re: Boat issue [Re: wtr] #11575483 04/30/16 10:15 PM
Joined: Feb 2015
Posts: 4,724
F
Flippin-Out Offline
TFF Team Angler
Offline
TFF Team Angler
F
Joined: Feb 2015
Posts: 4,724
Lots of things could be wrong. One is that you may have lost power on a cylinder (or more). If a cylinder isn't firing, the gas/oil that should have burned goes out the exhaust port - and can be a source of the slick you saw. Losing a cylinder will also result in less power of course.

Pull the plugs and inspect them for differences. If you aren't mechanically inclined on this stuff, you probably need help in "reading the plugs" and diagnosis of the problem. Don't over-tighten spark plugs - the torque spec is usually not high.

Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3