The paperwork that comes with your Powerpole tells you how to re-program. Usually it is press down on the button on top of the pump till it starts blinking. Then press and hold the remote you are connecting until it stops blinking. ONe thing to remember, I have one foot switch that will sometimes freeze in the on position and the pump will keep running. I have to tap on it a couple of times to get it to turn off. This could be a problem also.
One other point. The powerpole pump processor will draw electricity from your battery ALL THE TIME. I would recommend putting a on/off switch in the red lean going to the pump. This will also prevent it from accidently deploying when you don't want it to. Like 75mph on the freeway. A switch only costs 3 or 4 dollars and can be purchased at any automotive parts house.
John K Fontenot-
The greatest joy in a parent's life is to see his sons grow into really good bass anglers.