Forums59
Topics1,039,371
Posts13,963,498
Members144,202
|
Most Online39,925 Dec 30th, 2023
|
|
Help with prop and Jack plate set up
#11165537
10/15/15 02:45 AM
|
Joined: Feb 2015
Posts: 119
Bassfisher15
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Feb 2015
Posts: 119 |
I just bought a 2000 model Stratos 283 with a 175 Johnson and I am having problems with the boat being slow out of the hole and slow to get up to speed. My top speed is around 62 which is fine with me but it takes forever to get that fast. Also when I put my boat on the trailer it boggs down really bad with I try and throttle it up the trailer. Should I be looking at getting a smaller prop or would adjusting the jack plate help me out? Any help will be greatly appreciated. Thanks
|
|
Re: Help with prop and Jack plate set up
[Re: Bassfisher15]
#11165765
10/15/15 06:35 AM
|
Joined: Oct 2005
Posts: 20,755
kingdad101
TFF Guru
|
TFF Guru
Joined: Oct 2005
Posts: 20,755 |
I'd look at carbs first..may need a good cleaning...
what prop is on there and did it do this when you tried it out before you bought it...
|
|
Re: Help with prop and Jack plate set up
[Re: Bassfisher15]
#11165976
10/15/15 12:43 PM
|
Joined: Aug 2006
Posts: 7,182
steve@S2Marine
TFF Celebrity
|
TFF Celebrity
Joined: Aug 2006
Posts: 7,182 |
set the prop shaft height at 3.5" below pad.
what prop are you running? how many rpms at w.o.t.?
|
|
Re: Help with prop and Jack plate set up
[Re: Bassfisher15]
#11166005
10/15/15 12:51 PM
|
Joined: Feb 2015
Posts: 119
Bassfisher15
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Feb 2015
Posts: 119 |
I am running a 14 1/2 24 pitch raker prop. Seems like that would be a good size for that boat and motor. The motor Starts good and runs really well it just feels like it doesn't have the response to the throttle like it should. And yes it did this when I test drove But I figured it was just a set up problem. I can live with it like it is but I would like it to be more reponsive.
|
|
Re: Help with prop and Jack plate set up
[Re: Bassfisher15]
#11166009
10/15/15 12:52 PM
|
Joined: Feb 2015
Posts: 119
Bassfisher15
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Feb 2015
Posts: 119 |
My tach is not working right now. The needle is stuck at 1000 rpms. Any advice on how to fix that?
|
|
Re: Help with prop and Jack plate set up
[Re: Bassfisher15]
#11166580
10/15/15 04:40 PM
|
Joined: Aug 2006
Posts: 7,182
steve@S2Marine
TFF Celebrity
|
TFF Celebrity
Joined: Aug 2006
Posts: 7,182 |
idk about the tach.
but, the setup may be wrong on your boat.
your welcome to come by our shop and we can look at it for ya.
714 S Main Quitman, Tx
|
|
Re: Help with prop and Jack plate set up
[Re: Bassfisher15]
#11166926
10/15/15 07:21 PM
|
Joined: Feb 2015
Posts: 119
Bassfisher15
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Feb 2015
Posts: 119 |
I might have to come by sometime. At least it will give me a reason to go chase some bass at fork.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|