Boat Lanes not showing on Lowrance Elite Ti2

Installed the new Lance Vick chip and not getting the lanes. All the warning/danger spots are shown but not the lanes. Neither of the online videos quite fit the Elite Ti2 so unsure how to troubleshoot this problem…the files for the boat lanes and idle lanes show up in my unit and the ‘On’ box is checked but just no lanes on the map…everything else, just no lanes.

Any suggestions?

Thanks.

Go into trails and make sure each trail has the display button turned on.

see if you can find the lane color adjustment,..change to red or black to see it,..

On a HDS: Setup->Chart->Trails=ON. Elite maybe similar.

Tried changing colors, still no go, same with the trails…they are ‘on’.

Have you tried to start a new trail of your own and does it show up???? If yes then good chance you have a defective Card.

Found the problem! There are 2 places the trails have to be turned on, not just 1…under waypoints/trails and settings/charts/trails.
Thanks for the suggestions.

That last one under settings is factory set to on along with Waypoints and Routes. Somehow it got turned off Glad you found it.