Posted By: basshunter1
Lowrance Question - 05/06/21 06:21 PM
I have a Elite ti 9 up front, wanting to get a Side Scan transducer for the trolling motor, it's a Minn Kotta Fortex US. Is there a Transducer that will fit the trolling motor with Down and Side,
Posted By: basshunter1
Re: Lowrance Question - 05/06/21 11:44 PM
Thank you sir,!!!! Do you know the exact transducer i need, as in model ### and so on. think I kno but want to be sure.
Total Scan transducer for a Ti unit, but if you have a Ti2 series - Active Imaging. Don't have model numbers for you and both of these are 3-1. In most cases the Total Scan runs best at 455 kHz with the original Ti series. The Ti2 Active Imaging in most cases provides best images at 800 kHz.
Posted By: basshunter1
Re: Lowrance Question - 05/07/21 01:54 PM
It'd the Ti unit, and many thanks!!!!
Posted By: Larry Mosby
Re: Lowrance Question - 05/15/21 08:11 AM
Just cut the eyes off the transom bracket, run a couple large stainless hose clamps between the transducer and bracket then tighten the bracket screws. Then mount it to the bottom of the the Fortrex with the hose clamps. I’ve done several this way over the years.