Posted By: JMac80
Aerator wiring issues - 03/09/20 04:33 AM
I have a 95 Ranger 487VS, I recently took the dash panel off to hydrodip it and I forgot how the wiring goes on the aerator switches. I have a timer with 3 prongs on it, then each switch has 8 prongs. There is a black wire with three terminals, a brown wire with 2 terminals, another brown wire with 2 terminals and a brown and white with 4 terminals. Has anyone come across this? TIA
Posted By: hopalong
Re: Aerator wiring issues - 03/12/20 03:59 PM
black should be ground, brown should be power to pumps, white/brown is probably power in.
get a meter and check br/wh to the black, see if you have voltage.
your on/off switch should go thru the timer, pwr in, pwr out and ground on timer.
without seeing the terminal set up on the wires and switches it is hard to figure.
Posted By: BillS2006
Re: Aerator wiring issues - 03/13/20 12:54 AM
Do a search for ranger wiring diagrams. Lots show up.