Texas Fishing Forum

Wilson's Cut Mustang Iesland

Posted By: heef

Wilson's Cut Mustang Iesland - 05/02/14 04:26 PM

I was looking at Google maps and saw a spot at the end os Wilson Cut that looked like youy could put a boat in there and head straight for Shamrock Bay. Any one ever do that? I am looking for a shorter trip to get to shamrock bay.
Posted By: JimRinTX

Re: Wilson's Cut Mustang Iesland - 05/03/14 04:25 PM

I was there a year or so back and there were a couple of boat trailers parked there. A game warden put his boat in while I was there.
Posted By: heef

Re: Wilson's Cut Mustang Iesland - 05/03/14 08:11 PM

thanks for replying. I think I am going to try out next time I am do there
Posted By: boocat

Re: Wilson's Cut Mustang Iesland - 05/04/14 12:36 AM

Used to put in there 30 yrs ago, dirt "ramp" as i remember. Did ok for smaller lighter skiffs , jon boats and such. Was subject to being rutted when abused when ground was wet but never remember it being unusable. Sure don't remember it being anything I would try for a 25ft boat with triple axle trailer. And great access to Shamrock.
jk
Posted By: Aggeek

Re: Wilson's Cut Mustang Iesland - 05/09/14 09:21 PM

It's mostly a launch point for kayakers these days.
Posted By: TroutSupport.com

Re: Wilson's Cut Mustang Iesland - 05/11/14 03:02 PM

Yes, you can do that. The entry is a little trecherous and sandy though. Take the entrance that's about 200 yards south of the cut and then makes a turn back to the cut...it's harder packed sand.
© 2024 Texas Fishing Forum