Minnow Head Mold

Anyone know where can I get a Minnow Head Production Mold rcessed eyes in 1/16 oz +/-?

Barlows has them in half 1/16 and half 1/32.

http://www.barlowstackle.com/Do-It-Minnow-Head-Jig-Molds-P190.aspx

Thanks Tx. Do these have the kind of hollowed out place under the head?

FE1.....yes they do.....not much to trim either when you do not use metal keeper. Great mold and great price with Barlows

http://www.barlowstackle.com/Do-It-Minnow-Head-Jig-Moldbrwith-Wire-Keeper-P3028.aspx

I don't see any hollowed out place on mine.

Thank You both for your help.
From what I've learned the ones I'm looking for are from a custom mold (RonDons).
Txmedic the one you have is probably the closet thing to it in a commercial production mold.

Plateboater could you post a pic of the bottom of the one you have?
The one you referenced is a multi size single pour if I'm not mistaken, please correct me if I'm wrong.

FE1....you are correct it is a single pour. Pain the butt. TXmedic you may have older model. They came out with your mold with wire keeper.

Let me know if you need a pic....it now has the section cut for wire instead of being a mod. RonDons are from CrazyAngler and I think he retired from doing mods. And RonDon is getting addicted to pouring plastics now!!!!!!!!!!!!!!!

I think the mold mentioned above will work just fine. 2nd option is below.....that model teardrop style with 1/16 you can run a #2 or #4. The 1/8 can run a #1 down to #4.
http://www.barlowstackle.com/AdvancedSearch.aspx?k=473486