Posted By: malibu6501
ILM Modular Helmet 159 cheek pad mod - 08/08/22 12:03 AM
This is going to be relevant to very few, but maybe it will help someone. The cheek pads on my helmet were too tight. I tried to order new pads, but the helmet is no longer made by ILM. So I cut the stitching. Yep. Did it. Then, when pulling out the existing pad, I noticed that there were two pads one on top of the other. So, I pulled one off, which made it thinner and tried it. Then I went to the thinner pieces and put them in. Perfect. Sewed it back together and good to go. I thought I was going to have to shave the foam.