Jig head

What do you all prefer pill/asprin head jigs or the round ball head jig. Im leaning towards the pill head because you can add a stick eye or leave them off. The ball head if im understanding it right i would have to get two different molds one with the recessed eye spot and the plain.

Can take a round head jig and flatten the side, too glue an eye on... With a hammer or pliers

Didnt think of that but good to know

Give me ball heads, all day long...like the other responder noted...a small hammer will make pill heads...I have made them that way when the need arised.

You have to be careful using a hammer or pliers to flatten a jig head. Even with light pressure, the hook can loosen or the jig head split. Trust me, it happened so much to me I only buy pill head or jigs with recessed eyes. I powdercoat my own jigs and put 3D eyes on them.

Well i went with my gut and bought the pill head jig mold only downside is there is only one cavity of each size i will use, but i poured 100 jigs and didnt seem to take very long.

No reason for using any other. Unpainted and no eyes of course.

Ball for me as well

I will pretty much experiment with all kinds of jigs.

Yep! Also do this with my bell weights when fishing below dams..