Posted By: The Crappie Guy
Workmanship Period - 06/07/18 07:09 PM
Hey guys. I recently purchased A Lund 21', and it was very nicely equipped...but, I decided it was not as 'nice' as it could be. So I contacted David at Shut Up And Fish and told him we needed to "step it up". David and Steve installed a Solix 10 in the dash console, after removing the Helix 10 Mega. They then moved the Mega to the bow, after removing the Helix 10 DI. They removed the Minn Kota Ultrex 24v 80# 60" and replaced it with a Minn Kota Ultrex 36v 112# 60". Well, what the heck...as long as we were working on the bow of the boat, Let's install a Humminbird 360 and mount the Helix 10 DI along side the Mega and dedicate it solely to the 360. Oh...and while they were at it, make sure everything is linked with 'go-to' capabilities.
To say that David and Steve did a good job would be an understatement. You judge for yourself.........and sorry for the alignment
To say that David and Steve did a good job would be an understatement. You judge for yourself.........and sorry for the alignment