Posted By: Justin B
Lake Graham with new accessories - 12/19/22 08:38 AM
So I finally upgraded depth finders from a Garmin Striker 4 to a Humminbird Helix 7si gen 2 that I got off a TFF member here for a steal. I also purchased and installed a power pole which I couldn’t be more happy with. I had a diy one for a while but finally bit the bullet and got the real deal.
I headed out to lake Graham and fished an area of the lake that I’ve never been before and ended with a solid day. (2) over 19inches and a bunch of 12-14in fish all on a Berkley Frittside 5 biggun HD threadfin shad pattern which is quickly becoming my new favorite crankbait. Water temp was 48 when I got there and warmed up to 53 when I left. Fish were off the bank about 15ft except for the biggest which hit right along the shore.
Next project is the transom mount with the power pole and motor. I bought the hpde board just need to drill hose for everything and mount it.
I headed out to lake Graham and fished an area of the lake that I’ve never been before and ended with a solid day. (2) over 19inches and a bunch of 12-14in fish all on a Berkley Frittside 5 biggun HD threadfin shad pattern which is quickly becoming my new favorite crankbait. Water temp was 48 when I got there and warmed up to 53 when I left. Fish were off the bank about 15ft except for the biggest which hit right along the shore.
Next project is the transom mount with the power pole and motor. I bought the hpde board just need to drill hose for everything and mount it.