Need Some Input on Minn Kota Ulterra

Tweaked the skeg on my Ulterra over a little today (less than 5-degrees). It's rotated back now with no noticeable issue. The motor is a 2011, so I'm wondering if this could have rolled or pinched the older O-rings. Would y'all recommend getting it checked out or just run it. There's no binding in the prop. Just don't want something that could be avoided with a fairly cheap repair turn into a leak into the power head running the repair cost up. Please let me know what y'all think and if you've experienced this.

The o rings should be OK. But with it already being 5 to 6 years old it wont hurt to reseal it. Cheap ins

Thanks for the input Bruce. I'm worried about the o-ring age as well.

Also very easy to do

2011 Ulterra ?

?

Roll the dice and worry about something more important.

Sorry, 2011 boat. Ulterra's just a couple of years old.