B C Bunk Board Carpet [quality

Need info on where to purchase good quality carpet, for replacement.Either online or Dallas Garland area. Thanks For Help.

BPS carry's two colors of bunk carpet and it's precut to widths.

Bass cat has and it’s precut, I think it’s the best you can buy.

I used this.. I did have to router the edges of my boards.

No issues with mold mildew or staying wet all the time in my shop.

https://www.lowes.com/pd/amerimax-t...msclkid=15f007c150731222906c5b572f55125e

BassCats is heavier carpet than other mfrs, I'd go that route if you are going to install yourself

When I click on your link, it takes me to a vinyl downspout.

Thanks James & Mudbone, I have a P2 but was trying to pick up local to save a few bucks?? I ordered a few small items & a B. C. cap from B C {the shipping was 11.86} Really!!

Did you read my post? That’s what I used. Works great and real slippery.

Call rockwall marine and see if he has any boats comeing from the factory maybe he can work something out for you

Yes its heavy by alot but that can cause problems, realize heavier carpet on bunks will hold water longer and can cause blisters on you boat hull as well as worse rusting on the trailer brackets. Normal bunk carpet is made to dry out quick.

I sand down all the edges to my boards. Then i put down 10" wide fire hose with stainless screws (screwed into the sides of course). Then i put carpet over the top of that using monel staples.

I should probably not assume they use the same carpet on the trailers as on the boat, but the boat carpet is the best you can get
I've had same carpet on mine for 10 years, no blisters or any issues, so Legend may be right, it may be a lighter carpet for the trailer bunks

Why are people on here jerks? This thread was about carpet, nowhere in your post did you say I DIDNT USE CARPET I USED VINYL, the guy just asked you to confirm you had the right link. People commonly mislink stuff. You could have just said, yes, and it works great for your application.

HAHA,,,, pot meet the kettle...

My original post said I USED THIS... Thats the same as saying I didnt use carpet I used vinyl...

My second post asked if he read it.... because it was CLEAR as can be...

My post to you if you werent such a jerk would be Im sorry you cant comprehend my post, maybe you can find someone to explain it to you. See the line two lines up... But really thanks for the laugh.

OK maybe you dont get it. When you use a word like THIS it leaves it up to people to assume what you are talking about. Since you didnt say you used a different material that what the thread subject was about, the person asked you to confirm you meant the vinyl downspout. Then you replied back like a Smarta** asking if they read the post, rather than just confirming. To which I asked WHY MF-ers on her always have to be jerks and condescending, when this is supposed to be a forum for us all to learn and share. Stop being so smart and be helpful, it doesnt take much.

Maybe just a miscommunication, but I agree, there seems to be a lot more smart a$$ comments on here than helpful ones lately.
Kind of a shame- used to be fairly friendly site for most fisherman to trade information and ideas, but really getting old


My favorite in a while was the Yamamoto Ranch report where the OP told a guy to "eat a d--k", then is putting bible verses and Jesus on him in the very next post...SMDH?

Bass Cat