Posted By: Gilly62
Lowrance Linking Problem - 05/08/18 10:41 PM
Im having a problem with my two HDS's linking. I had the same problem before, found a blown fuse, replaced it, and it fixed the problem, for a few trips. Same problem again but no blown fuse this time. Any suggestions? Could I have the wrong amp fuse?
Posted By: grout-scout
Re: Lowrance Linking Problem - 05/08/18 11:32 PM
What model and size of graph?
The non-touch were all 3 amp I believe and the 9 & 12 touch models were 5 amp. Only one that I’m not sure of is the 7” touch.
Posted By: Gilly62
Re: Lowrance Linking Problem - 05/09/18 01:01 AM
They are both the 12 touch models. One is a gen 2 and one is a gen 3
Posted By: grout-scout
Re: Lowrance Linking Problem - 05/09/18 01:44 AM
Those are def 5amp fuses, I have 2 12’s also.
On the power cord, did you tape up the loose wires individually from the NMEA 0183?
Posted By: Gilly62
Re: Lowrance Linking Problem - 05/09/18 02:23 AM
I bought the boat with the power cord already run.