How to cook steak

This is the best i have seen:

Choose the right pan

If you aren’t cooking your steak on a grill, it’s important to turn to the correct pan to get the job done, and in this case that means cast iron. Thick, heavy and designed to retain heat, a cast-iron pan will ensure you get a fantastic sear and in turn a wonderful brown crust on the outside of your steak without overcooking the interior.

It’s incredibly important to preheat cast iron 350F— to get the best sear possible; your pan should be smoking hot before you have added any oil

Choose the cut

The four most expensive cuts of steak are rib-eye, New York strip, tenderloin and porterhouse. These are the steaks you find most often on restaurant menus and certainly in steakhouses across the country. That’s not to say you cannot grill a more inexpensive cut to perfection.

The important things to consider when selecting a steak are how you want to cook it, to what temperature, and how you’re going to serve it. A bone-in rib-eye is a star cut and easily stands alone, needing only simple seasoning; other cuts lend themselves particularly well to hearty marinades, and others make for fabulous tacos. No matter which cut you choose, even if it is a cheaper one, you should still cook it with care and understanding.

Tempering?

Contrary to popular belief, countless culinary experiments and side-by-side comparisons seem to indicate that it is not essential to temper your steak — i.e., bring it to room temperature — before cooking. It’s not a bad idea, though, and many cooks still swear by it.

More essential than a room-temperature steak is a dry one. If the surface of your steak is not dry before it hits the pan, you aren’t going to get that desirable crust, so make sure you pat off any excess moisture with a paper towel!

Seasoning

One of the biggest differences between home cooking and restaurant food is the amount of salt used. Don’t be afraid of making it rain! You want to season liberally enough to season the entire steak — the salt sits on the outside, but you want the whole thing to be delicious, right? Kosher salt is the best salt to turn to when seasoning; it’s the most commonly used all-purpose salt in almost all kitchens. The larger, coarser grains make it easier to season evenly, which is important to do when seasoning a larger surface area such as a steak.

Oil your steak before seasoning with salt and pepper — this will help the seasonings stick to the surface and also eliminate the need for oil in the pan.

The moment of cooking

Add your seasoned steak to your very hot cast-iron pan (if you are not grilling your steak) and leave it to develop a nice crust before flipping. Back in the da,y everyone was constantly told to only flip a steak once during the cooking process. Like tempering, this is not widely considered to be wrong. Cooking times vary hugely depending on the size and cut of steak. Unless you are a pro at cooking steak, the most reliable way to gauge doneness is with a meat thermometer. There’s absolutely no shame in using a meat thermometer to help you reach the right internal temp. Just make sure you don’t repeatedly stab at your steak. A few temp checks is fine, but try not to turn your steak into a pincushion.

Remove your steak before it reaches the final temperature you are aiming for — it will keep cooking a bit once it’s off the heat. Remove your steak when it reaches the desired internal temp:

Rare: 125F

Medium rare: 130F
Medium: 140F
Well done: 160F

Allow it to rest

Once you remove your meat from the pan, it is time to rest. Place your steak on a plate and lightly cover it with some aluminum foil and leave it for (ideally) half of its cooking time, or at least 5 minutes if you really cannot wait. This gives the juices inside the meat a chance to settle back into the steak and evenly redistribute — cut into your steak too soon and they will all run out, leaving you with a disappointingly dry steak.

Any more done than this you need to sit at child's table...

yum,...

Just the way I like it!👍

So it says to make sure the steak is dry before it hits the skillet in one paragraph then further down it says to oil the steak before seasoning. Which is it?

Only way to make it better is 145 degrees and a little catchup or 57 sauce!

Good steak doesn’t need sauce, especially ketchup.

1-1/2" steak
Pat DRY then sprinkle...on both sides
1 tbsp of Kosher salt
1 tsp of fresh ground coarse black pepper.

In a cast iron pan add a couple tbsp of vegetable oil.
Bring to med-high heat and wait till the oil begins "to splatter"
Place steak in pan to seer, usually about 3-4 minutes each side.
Use a meat thermometer if necessary
Flip steak again for 2-3 more minutes each side.
The last minute of the cook add 1 tbsp of butter and a sprig or two of fresh thyme.

Remove from the pan and wrap with tin foil, place on cutting board and let rest for for a 5-10 minutes
Then slice..............enjoy

Nuff said, from the Master Chief...Its not complicated.

Yes, it does!

Sometimes you feel like a nut...sometimes you don't.

I don't know about tempering but letting steak sit with salt definitely helps draw moisture out. I get better results when I let it set an hour prior to cooking.

oil and water are different...oil is ok...water is not. Remove excess water with a paper towel...rub vegetable or olive oil to allow for seasonings like course ground salt and pepper to stick.