Texas Fishing Forum

94 mariner 200 efi stalls when shifting in to gear.

Posted By: byrom1212

94 mariner 200 efi stalls when shifting in to gear. - 06/16/17 03:44 AM

Motor starts fine most of the time, but when you shift in to gear it dies. Usually after a few tries I can get it up and going and then she runs like a champ. Any help would be great.
Posted By: TLW

Re: 94 mariner 200 efi stalls when shifting in to gear. - 06/16/17 08:56 AM

send me an email addy.. will send ya an oem manual (pdf).... will help ya some.. several things can be suspect for this issue... ie: fuel, fuel delivery, link n sync, module, timin' and so on and on and on....

will, at least, help ya recognize parts and adjustments etc.........
Posted By: hopalong

Re: 94 mariner 200 efi stalls when shifting in to gear. - 06/16/17 09:02 AM

what are the idle rpm's? checked your butterflies for sync? linkage set properly for timing advancement?


check those first.
Posted By: gary purdy

Re: 94 mariner 200 efi stalls when shifting in to gear. - 06/16/17 11:34 AM

Check to make sure it has the correct sparkplugs BU8H. Check the thermostats, sounds like it could be a cold motor. These Mercs need to come up to temp to run right. Use Sea Foam. Check the complete fuel system. Idle stabilizer may have quit. This motor has a hidden fuel filter in the electric fuel pump supply hose ( U shaped ) Clean the fuel screen above the electric fuel pump. #7 and 47 http://www.boats.net/parts/search/Merc2/Mercury/V-200XRI%20%28EFI%29/0C291520%20THRU%200D081999/FUEL%20MANAGEMENT%20SYSTEM/parts.html
Posted By: TWINCITY

Re: 94 mariner 200 efi stalls when shifting in to gear. - 06/17/17 11:37 PM

Check to see if there is a little white filter on the passenger side of the motor. I had to change mine every year. Also there is a TPI sensor (THROTTLE POSITION INDICATOR) check the connection. Make sure it is tight and not corroded.
© 2024 Texas Fishing Forum