How do I change out a solenoid for a 1996 Evinrude 115

It took me a while to locate it but I found it under the starter. Do I have to pull the starter to change out the solenoid?

Dropping the bottom cowling is easiest way.

Thanks Purdy, I'm gonna' try that.

Next day, same job (putting in the starter solenoid) and I find out trying to lower the cowling is harder than taking out the solenoid.

I guess I better make a video on this in case anyone else ever runs into the same solenoid from he77!!!

Cowling unbolts and you can remove just that side. I don't understand what could be so hard. Welcome to the world of a boat mechanic.

I can't believe I took an hour to take it out and I've spent 4 hours and haven't made it back in yet.

I WILL be looking for those bolts to release the cowling.
I don't want to be a boat mechanic, but Rockwall said I couldn't bring it in until next week and I wanted to be fishin'...Butch at West was my mechanic and now I don't have one that likes to keep me fishin' - you know what I mean.

I need pictures or a video of it all. This is my first trip into an out board motor -----------and I hope my last.

Look at where the 2 cowlings come together front, back and under. The cowlings bolt to each other.

I guess that sun turned off my thinking yesterday. I looked and couldn't see anything but sure nough, you walk to the starboard side of that motor and right there looks like three bolts.

Thanks again Gary,
now if I pull that apart enough to slide that starter and solenoid on, the kitchen sink won't fall out of the bottom of the cowling when it separates, will it?

Nope