Aluminum Boat Transom Leak

Posted By: nanboban25

Aluminum Boat Transom Leak - 10/04/21 05:34 PM

I have a 1995 Lowe Aluminum riveted boat that has a small leak below the transom where the back panel meets the bottom of the hull. I am curious if an aluminum welder might be able to place a bead along the seam to fix the leak and prevent any future leaks. Any help would be appreciated. Thanks!

Attached picture IMG_0895.PNG

Posted By: Pat Goff

Re: Aluminum Boat Transom Leak - 10/05/21 02:15 AM

A good welder can indeed fix it.

Posted By: gar1970

Re: Aluminum Boat Transom Leak - 10/05/21 05:27 AM

Yes that can be fixed. I had a crack on the front of mine [Linked Image]

Cost me 75$ to get it welded [Linked Image]

His welds are better than the factory welds [Linked Image]

Good luck finding a good aluminum welder

Posted By: boatman025

Re: Aluminum Boat Transom Leak - 10/05/21 02:02 PM

Magill's in Lewisville can fix you up