kill switch prevention clip

helping a friend get this older motro running but having problem getting correct plastic clip for lanyard to attach to kill swithch. I ordered a lanyard with 10 choices and I can not get any to fit . Not sure of year but i have pic of kill switch if that helps. Any advice appreciated. can one be made ? Pic from phone to follow. Please pm or text 972 740 1243 Thx

just replace the whole switch.



https://www.wholesalemarine.com/sea-dog-marine-universal-kill-switch-with-lanyard.html

thx Hopalong.Will take it apart and see if it will fit. Its on tiller handle

there are different types too, that one may work.

This is a pic of inside out kill switch area . Was hopiN g I could just plug it in like pic you
sent but just 2 wires going into switch . I would not even mind a toggle switch it it would pass muster with wardens

go here.. might find what ya lookin' for... ya gotta copy n paste.

https://www.google.com/search?q=johnson+outboard+kill+switch&tbm=isch&chips=q:johnson+outboard+kill+switch,online_chips:tiller+handle&usg=AI4_-kSdiWt8zVa62bNE1zYioURvz2HFMQ&sa=X&ved=2ahUKEwi_tOyW3rvsAhWUAZ0JHVMuDQIQgIoDKAB6BAgUEAc&biw=1536&bih=754&dpr=1.25#imgrc=BjO4LdS733y02M

what brand is the engine?


give me ser # and make/hp and I can find the original replacement if they are still out there.

if a johnson or evinrude give me the model # ie. something like this. BE30BAEDE

hi thx all the support and advice 2 new problem.After taking the kill swith out I got it working as it should but would like to get it working mounted and protected. Whill fiddling trying to start and run it is not peeing anymore. check the outflow hose for blockage , all clear. And I took pic ( shown ) of model and area all around it was all scraped up like it had been dragged so not exactly sure.

It is a 15 HP Johnson guessing early 90 s as my 1988 was different shape. posting pic from phone so may take time or not work at all

TLW amongst lodels you sent I think 2 would work but i am hesitant ordering from China. Hopefully someone in US will have it.If not I will get from Cihna

it's a 92

https://www.boats.net/catalog/johns...992/steering-handle-amp-throttle-control

this is the factory part, it ain't cheap tho


https://www.boats.net/product/johnson/0584470?ref=ba1f0076e21461423a5497b0684880ab02d1b4fe

wow you really know your stuff. You were right on expense as this is just a help project in case i sell my boat thats more then I need or feel comfortable. Since moving to small water I don t need a 90 hp heavy boat or the truck I need to tow, The 15 would be fine for a 14-16' aluminum. Thx again and will keep the schematic .And also thx for figuring the year.

they also have just the lanyard and key for the kill switch, got sidetracked.

tha china junk is almost only supplier for parts such as these unfortunately.. USA parts in this category are almost non existent.. sad,

good luck with your project.