ISO Wetsanding/buffing near DFW

I’ve got an 18’ boat that I’d like to treat the gelcoat a little bit.

Any reccommendations for a good wetsand/buff/wax etc. near the Rockwall area? Thanks!

Before wetsanding and buffing, try 3M Perfect-it Gelcoat HEAVY cutting compound with a wool pad on a good polisher that you can change the speed setting on. A decent amount of pressure and working small areas at a time will give you a nice shine even on the worst of surfaces. You may have to work the areas with several overlaps, but I've seen great results out of old gel with this product/method.

Vic’s Marine is in Rockwall, they’ll shine it up for ya at a decent cost, and they use 3M products.