Networking two HDS 8 for Waypoints

How is this done? The way i have it working on is one is the slave to the other

Are you using an ethernet cable to link the 2 together?

Yellow connector to yellow connector with a cable?

I have an LMS-520C and an LCX-112 networked together using the SonarNet cables.

You can't share maps between units ,but you can waypoints.

I would research this for you but it seems the lowrance website is down.

If I set a waypoint on the front unit (LMS-520C) that waypoint shows up on the console unit also and works the other way around.

Ethernet Networking solution

http://www.lowrance.com/Products/Marine/Broadband-Sounder-and-Ethernetworking/

NEMA 2000 (this is what I'm using)

http://www.lowrance.com/Products/Marine/LowranceNET-Marine-Networking-System/

Yeah i couldnt get the the nmea to work, i have it hooked up like the pictures show. The yellow wire works just fine

So what is the problem your having?

nothing now, once i went to the store and bought the correct wire.

DOH!!

Have fun with them units.

Here is some good info on networking HDS units.

http://primus.lowrance.com/support/resul...Type=5000#Goto4