Posted By: herbsteiner
Helix 10 loses depth/temp readings - 10/04/19 05:04 PM
I just replaced my HDS 9 Gen3 console unit with a Helix 10 DI/SI G3N. When not on plane and under 10mph, all depth and water temp readings are true,. But when on plane, the depth reading spikes into the 1000 ft. range and the temp goes from normal Farenheit numbers to 200-500 with a "t" instead of the "f".
The Mega/DI/SI transducer is mounted to the transom in the same place as the Lowrance TD was.
Does anyone know what's going on with the Helix? Or should I contact HB?
The Mega/DI/SI transducer is mounted to the transom in the same place as the Lowrance TD was.
Does anyone know what's going on with the Helix? Or should I contact HB?