Plug for Pedestal Hole on Front and Rear Decks

I do not use the pedestal seats in my boat at all (2002 Ranger Comanche). I am looking for "plug" ideas. I have googled it and found a couple, but I am interested to see what others have done. Thanks!

PICS?

got mine at tackle ware house got the metal one which I believe is stouter to walk on almost a flush mount I like it get the one from bobs machine shop not the t and h

I have the Bobs Machine shop plugs

https://www.tacklewarehouse.com/Bobs_Machine_Shop_Pedestal_Plugs/descpage-BOBSMA.html

If it's a 3/4" hole, I would get a PVC plug from Home Depot. It will be low profile, easy to paint with Krylon, and easy to remove. Probably about $.35.

I saw the ones from Bob's Machine and that is probably what I will buy. I was just checking to see if there were any more out there. The ones from Bob's actually have the o-ring, so water will not leak into the front compartment.

I used a rubber plug I got at Lowes (or Home Depot probably) couple of dollars and works fine - they have different sizes.

I recommend these as well.