Posted By: StormVet
Electronics - 02/21/14 03:06 AM
On a budget and need some advice. Do any of y'all run one graph but can move it from drivers console to the front deck? If so how did you run the wires for hook up?
Posted By: 361V
Re: Electronics - 02/21/14 10:12 PM
While not the most comfortable set-up I would mount it next to the console on a ram mount and swivel it around when you are on the front deck. Many have done this. If you have to unmount and unplug then remount and plug it back in everytime you move you will quickly tire of this and end up not moving it. I broke down a few years ago and bought a Humminbird 897 side immaging finder for the console of my 1992 Ranger 361V and had the cheapest little finder I could buy in the front and this set up worked great for years. Somebody give this vet your little unused finder sitting in your garage :-)