Trailer boat latch

Do any of you have any experience or opinions on the boat to trailer hookup or the ramp n clamp.? Thinking about adding this to my trailer for an easier load up.

I am seriously looking at the ramp n clamp sport model, looks like a good design. I fish mostly solo so anything that makes it easier to load is welcome.

Put a easy step on my trailer, best thing i ever bought .

I will never have another trailer without a set of steps.

I put the drotto boat 2 trailer on about 2 years ago and will never be without that addition again. best add on I have done in years.

I had put on a boat buddy which is similar to the ramp and clamp and I would not do without it. Put it on about 15 years ago and it works great if you are by yourself or if you are tournament fishing so that you can get out of the water quick.

Easy step is great!!!!

My buddy and I put the Drotto on both of ours. Easy to launch and load.

good morning,

love my drotto!!

good luck,
PURA VIDA,
bluebonnet2

Which one is the best quality?

I will never have another without a set of Trick Steps on it as well!

I just installed a Drotto latch. It works perfect.
I had a boat buddy years ago and it didn’t work very well. The Drotto is easy to install and is designed correctly.

I am on my second boat with a Ramp n Clamp. My boat partner loves it because he no longer has to get his feet wet to attach the trailer hook.

did any of you guys get the drotto with the roller? I have a Skeeter 20i was wondering if it was necessary.

According to their site you can add the roller at anytime. Try it without it first and see if you need it.

thanks

My buddy ordered his with the roller, he has a 21ft Ranger. Works just as it should.

My drotto just came in. putting it on this weekend. its sure heavy duty.

The Drotto 2 is for skeeter and Ranger. It has a roller. I think you will need it.

Yes that's the one I got for my new Ranger!

I have had a buddy on my trailer for 10 yrs no problems, upgrade may lean to drotto

Anybody put a Drotto on a Phoenix 920 Pro Xp? With or without the roller?

just installed on skeeter 20i definitely need roller. also had to use top hole on the mount.

Just helped my buddy install one on his phoenix 920 trailer 3.75 inch with roller had to use extra washers to shim out to 4 inches...seems to work great...will be ordering mine..

Thx, ToadThrower!!

now have a ramp n clamp on the way.

hope to get it installed this weekend if it gets here in time.


update: installed it today, I am gonna like this since I fish solo a lot, should have done it yrs. ago.

I finally got my Drotto installed this weekend. Easy to install. It works great.

I installed the Drotto with the roller on my Triton few months back. Works great!

Thanks to this thread I installed the Drotto yesterday. It was an easy install and works great.