|
Forums59
Topics1,152,564
Posts15,744,030
Members143,059
| |
Most Online36,273
Jan 23rd, 2013
|
|
 hyd. steering
#6894387
11/30/11 03:23 PM
|
Joined: Mar 2008
Posts: 1,614
James P.
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Mar 2008
Posts: 1,614 |
how much play left to right before motor starts to turn is 2" to much? its on a 250hpdi
|
|
|
Re: hyd. steering
[Re: James P.]
#6894676
11/30/11 04:49 PM
|
Joined: Jan 2004
Posts: 2,424
rb7764
Extreme Angler
|
|
Extreme Angler
Joined: Jan 2004
Posts: 2,424 |
there should be virtually no play. I bet you have air in the system due to a leak.
|
|
|
Re: hyd. steering
[Re: James P.]
#6894801
11/30/11 05:25 PM
|
Joined: Mar 2008
Posts: 1,614
James P.
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Mar 2008
Posts: 1,614 |
I bled the lines last night no air and its the same as before
|
|
|
Re: hyd. steering
[Re: James P.]
#6896504
12/01/11 02:18 AM
|
Joined: Nov 2007
Posts: 5,078
ssmith
TFF Celebrity
|
|
TFF Celebrity
Joined: Nov 2007
Posts: 5,078 |
take it to a dealer that has the sea star power purge an have them hook it up to be sure all the air is out of the system good luck.
|
|
|
Re: hyd. steering
[Re: ssmith]
#6896998
12/01/11 03:50 AM
|
Joined: Nov 2008
Posts: 1,552
BassHunter 69
Extreme Angler
|
|
Extreme Angler
Joined: Nov 2008
Posts: 1,552 |
PM me your E-mail and I can send you the PDF manual on bleeding the system. It must be done just right to get all the air out of it.
Field Staff for Wicked Weights (Tungsten Done Right!)
|
|
|
Re: hyd. steering
[Re: James P.]
#6897543
12/01/11 01:06 PM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
Make shure you do`nt have any end play on the hydraulic ram rod mounts. Their is a adjusment nut w/ allen head bolt lock on the starboard side.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
|
Re: hyd. steering
[Re: James P.]
#6901069
12/02/11 12:53 PM
|
Joined: Mar 2008
Posts: 1,614
James P.
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Mar 2008
Posts: 1,614 |
are you talking about thr little coller thingy with allen screw? and should i be able to move motor with my hands 1/2" to 3/4" ?
|
|
|
Re: hyd. steering
[Re: James P.]
#6901217
12/02/11 01:57 PM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
Yes on the coller and no on the movment. The center connection bolt may need attention. Have seen them wear and alow movement but slack is most likly in the collar adjustment.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
|
Re: hyd. steering
[Re: James P.]
#6904155
12/03/11 12:12 PM
|
Joined: Oct 2011
Posts: 11
boatsteeringrebuilders
Green Horn
|
|
Green Horn
Joined: Oct 2011
Posts: 11 |
Zuma, Check all of the mechanical attachments for play as recommended. If everything is tight do the following: With all air bled from the system and the motor pointed straight, while looking at the steering wheel, push on the motor to one side. If the motor moves and the wheel trys to turn, you most likely have a helm valve problem. Watch the wheel closely. It will only turn slightly if at all. If the motor moves and the wheel does not move, there is an issue inside the cylinder. Either way I can get you back on the water. Give me a call. Butch 210-317-7035 www.boatsteeringrebuilders.com
"We'll take a leak......and then fix it"
|
|
|
Re: hyd. steering
[Re: James P.]
#6904196
12/03/11 12:58 PM
|
Joined: Mar 2008
Posts: 1,614
James P.
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Mar 2008
Posts: 1,614 |
I moved motor last night didnt see wheel moving buti could move motor i think about 1/2" 3/4" with my hand I had play at coller when I move wheel at helm its like wheel is connected to nothing the first 1 1/2" 2" then you can fill some kind of tension and motor will start moving thank to all that have responded so far james painter
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
