Where do I find the type of non- slip mat that is on the bow of the boat next to the trolling motor. There are a couple more places in the boat I wouls like to lay some of this. Anyone know?

here is one place that was recommended by a member..

http://www.stewartssurestep.com/index.cfm

I saved the address because soon I'll be getting some too..........

Ryan, I replaced all of the no-skid on my boat last year. Here is a link to the manufacturer. I got the name of these guys from the folks at Triton in Tennessee. This is who manufactures the no-skid for their boats. The one I have is the 'jelly bean' shape about 2/3 of the way down.

The original piece was 37" by 74" and I have about 37" by about 48" left. The 'jelly beans' are about 7/8" by 1/4". This already has adhesive on the back, so all you do is cut the shape you want, peel off the backing, and stick it in place.

If you want it, just make me an offer. I will be in Miller Grove (near Quitman) this Saturday if you want to meet.

http://www.stewartssurestep.com/products.cfm

got mine at wally world, got 3m adhesive on the back and best step stuff I have ever had. see below

Academy, Bass Pro, and Cabelas usually have some sticky back, no slip pads that are more like really rough sandpaper. I like those on the bow as they aren't as slippery (to me) as the diamond tread rubber.

If you want to save money go to Tractor Supply and buy one 4X8 piece of barn matt-water will drain through it and you can cut it to the size you need-I use it in my CC because the boat has no carpet so it helps with traction when the floor is wet