Terrova 60" shaft support

Terrova 60" shaft support #14736835 06/01/23 05:30 PM
Joined: Jan 2019 Posts: 89 Richmond, TX J JILAS OP Outdoorsman
OP JILAS Outdoorsman J Joined: Jan 2019 Posts: 89 Richmond, TX	I have new 24V 80# Terrova with 60" shaft on recently acquired 2010 Nitro Z-7. What is best way to support 60" shaft while moving on water and traveling on highway? Will PVC pipe work or need "special pre-fab" support?

Re: Terrova 60" shaft support [Re: JILAS] #14736978 06/01/23 07:36 PM
Joined: Sep 2006 Posts: 12,288 NRH/Fork ! GET THE NET J JIM SR. TFF Guru
JIM SR. TFF Guru J Joined: Sep 2006 Posts: 12,288 NRH/Fork ! GET THE NET	I've had 2 60" shaft trolling motors in 9 years,...no support needed. I thought the same thing, that it would need a brace. I never used anything,..no problems. There are braces you can buy on line. jim Last edited by JIM SR.; 06/01/23 07:39 PM. https://constantpursuitoutfitters.com/ www.boatlanes.com http://407bbq.com/ http://www.lakeforkcrappie.com/ https://www.jiglyf.com/ Pronounced "Jig Life" https://shut-up-and-fish.com/ https://kidkrappie.com/

Re: Terrova 60" shaft support [Re: JILAS] #14740787 06/06/23 12:12 AM
Joined: Jul 2010 Posts: 23 North Texas R rooster6 Outdoorsman
rooster6 Outdoorsman R Joined: Jul 2010 Posts: 23 North Texas	x2 Mine is a 2015 Terrova 60" Shaft on it's 3rd boat. 2 bass boats and a Pontoon in between. Each time I switched boats I thought I would brace it on install. It still bothers me driving down the highway when I look in the mirror and see it bouncing in the wind, but the shaft not being supported has not had an impact on performance.

Hop To