|
Forums59
Topics1,039,250
Posts13,961,545
Members144,197
| |
Most Online39,925
Dec 30th, 2023
|
|
 Tilt/trim issues
#14577045
12/27/22 02:58 PM
|
Joined: Apr 2012
Posts: 64
popcat10
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Apr 2012
Posts: 64 |
I have a Suzuki DF300AP. When you turn on the master power switch at the console the motor immediately trims down and you cannot raise it with the switch on the shifter or the switch on the motor. With the master power switch at the console in the off position both switches for the tilt/trim work fine both in the up and down direction
|
|
|
Re: Tilt/trim issues
[Re: popcat10]
#14577158
12/27/22 04:35 PM
|
Joined: Mar 2010
Posts: 25,829
T Bird
TFF Guru
|
|
TFF Guru
Joined: Mar 2010
Posts: 25,829 |
Sounds like your tilt/trim system is OK.
Possibly bad master power sw. or short to ground in your boat wiring where tilt/trim is sharing power with another system/component.
Are any other systems/components acting up with the master power switch on? Engine start, lights, bilge, aerators, horn, gauges, fish finders etc.
Okie by birth, Texan by choice. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/01/full-47849-80883-111.jpg) USAF "Thunderbirds" Alumni 1985-1989
|
|
|
Re: Tilt/trim issues
[Re: popcat10]
#14577169
12/27/22 04:48 PM
|
Joined: Apr 2012
Posts: 64
popcat10
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Apr 2012
Posts: 64 |
It seems like everything else is working fine with the master power on. It has been doing fine until a couple of days ago when this issue came up. Thanks for your help
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
