Is there an adapter to hook up my old 2D transducer from my gen 1 to my HDS Live? I would like to use it for high speed sonar.

Yep, you need the 7 pin to 9 pin adapter. But be careful ordering, there is a 7 to 9 and also a 9 to 7 and they are for different applications. Make sure you read the description.


Might be better off just ordering a new 9 pin shoot thru though, it is a pain to replace them, but it’ll probably work better.

Thanks Grout. I’m guessing the 9 pin port is the one I have my 3-1 plugged into?

So on a Live, both ports are now 9 pin. You would put the shoot through in the blue port and 3-1 in the black port. I had some interference with both 2d sonars pinging with this setup, finally figured it out. Point being, if you have issues after hooking everything up, post back.

I think the 7-9 adapter is something like $30-$40

The right adapter for your current transducer.

https://www.lowrance.com/lowrance/t.../7-to-9-pin-xd-adapter-for-airmar-xdcrs/

Thanks