So the boat I bought is a basscat cougar. It's a 2019 with an evenrude 250 g2 h/o. It came with a raker prop on it and a fury prop extra. I was wondering if anyone can get me detailed directions on how to put the fury on. I can not figure it out ๐ฉ๐ฉ๐ฉ. Posted on other thread also don't know which is best to get help.
Adam Ramirez
Moritz Chevrolet - 9101 Camp Bowie W Blvd, Fort Worth, TX - Monte Coon (817) 696-2003
Your going to need a flo torque hub kit for evinrude. Itโs a delrin sleeve and spline bushing that fits inside the prop. If it wonโt work as is now it can be assumed you have the wrong one in it.
It has a spline and a brass like thrust washer I'm sure the precious owner used it. I just don't know the sequence and the thrust washer for the raker seems like it don't come off. ๐
Does this thrust washer need to come off for the fury prop or does it come off?
take a screwdriver and place behind the washer, gently pry up while tapping the shaft with a hammer. don't smack the shaft, tap right in front of the thrust washer.
that is not the right one for the fury either.
" Hop, set the hook"! hopalong 99,999 TexDawg 99,999 FJB! not my president by a long shot!
lake fork FISHERMANS COVE MARINA/reservations - 903 474 7479
if your interested, i have several evinrude props for my old boat (have a merc now) would be willing to do some swapping if your interested. edgrish@yahoo.com